Et profilbilde

Førsteamanuensis
Mudiyansele Samindi Manjula K Samarakoon { "honorific-suffix": "Førsteamanuensis", "fn": "Mudiyansele Samindi Manjula K Samarakoon", "tel": "Telefon: 51832387", "email": "samindi.samarakoon@uis.no" }

Avdeling/enhet Det teknisk- naturvitenskapelige fakultet
Institutt/senter Institutt for maskin, bygg og materialteknologi
Rom KE E-224

Forskningsområder

Utvalgte publikasjoner

Pågående forskning

Arbeidserfaring

Vitenskapelige publikasjoner (fra CRISTin)

  • Ratnayake, R.M. Chandima; Samarakoon, Mudiyansele Samindi Manjula K (2017). Structural integrity assessment and control of ageing onshore and offshore structures. I: Modeling and Simulation Techniques in Structural Engineering. IGI Global. ISBN 9781522505884. s. 445-476.
  • Samarakoon, Mudiyansele Samindi Manjula K; Ratnayake, R.M. Chandima (2017). Minimization of risk assessments' variability in technology qualification processes. Journal of Offshore Mechanics and Arctic Engineering-Transactions of The Asme. ISSN 0892-7219. Volum 139. Hefte 2. DOI: 10.1115/1.4035225.
  • Samarakoon, Mudiyansele Samindi Manjula K; Ratnayake, R.M. Chandima (2017). Technology Qualification of Offshore Wind Turbine Supporting Concrete Constructions: Mitigation of Future Catastrophic Incidents via Quantification of Unknown. I: ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering - Volume 3B: Structures, Safety and Reliability. ASME Press. ISBN 978-0-7918-5766-3.
  • Samarakoon, Mudiyansele Samindi Manjula K; Kakay, Samdar; Johnsen, Erland Soli; Knutsen, Fredrik Meidell; Knutsson, Jon Emil Tobias (2016). PERFORMANCE EVALUATION OF APLITE ROCK BASED GEOPOLYMER BINDER. I: Proceedings of the International RILEM Conference Materials, Systems and Structures in Civil Engineering 2016 Segment on Concrete With Supplementary Cementitious Materials. Rilem publications. ISBN 978-2-35158-178-0. s. 1-9.
  • Samarakoon, Mudiyansele Samindi Manjula K; Kakay, Samdar; Tefre, Pål Lieske; Buøen, Mats Reisæter; Kaushal, Vikrant (2016). Identification of optimal condition for the de‐icing salt scaling resistance of concrete. I: Proceedings of the International RILEM Conference Materials, Systems and Structures in Civil Engineering 2016 Segment on Frost Action in Concrete. Rilem publications. ISBN 978-2-35158-182-7. s. 131-139.
  • Samarakoon, Mudiyansele Samindi Manjula K; Ratnayake, R.M. Chandima (2016). Minimization of uncertainty during technology qualification process: fuzzy logic based approach. I: Proceedings of the Twenty-sixth International Ocean and Polar Engineering Conference - ISOPE 2016. International Society of Offshore & Polar Engineers. ISBN 978-1-880653-88-3. s. 1126-1133.
  • Samarakoon, Mudiyansele Samindi Manjula K; Stadnicka, Dorata; Vilke, Tor Gunnar; Ellefsen, Espen; Stangeland, Ole Magnus; Ratnayake, R.M. Chandima (2016). Assessment of value stream of formwork preparation process in prefabricating reinforced concrete elements. I: Proceedings of the International RILEM Conference Materials, Systems and Structures in Civil Engineering 2016 Segment on Fresh Concrete. Rilem publications. ISBN 978-2-35158-184-1. s. 63-72.
  • Samarakoon, Mudiyansele Samindi Manjula K; Sælensminde, Jan; Helle, Cecilie Myklebu (2016). CONDITION ASSESSMENT OF REINFORCED CONCRETE ELEMENTS EXPOSED TO CARBONATION. I: Proceedings of the International RILEM Conference Materials, Systems and Structures in Civil Engineering 2016 Segment on Service Life of Cement-Based Materials and Structures Vol. 1. Rilem publications. ISBN 978-2-35158-170-4. s. 29-37.
  • Sælensminde, Jan; Samarakoon, Mudiyansele Samindi Manjula K (2016). DETERIORATION OF CONCRETE STRUCTURES DUE TO SALT CRYSTALLIZATION; INFLUENCE OF SALT TYPES AND RELATIVE HUMIDITY. I: Proceedings of the International RILEM Conference Materials, Systems and Structures in Civil Engineering 2016 Segment on Moisture in Materials and Structures. Rilem publications. ISBN 978-2-35158-178-0. s. 107-114.
  • Samarakoon, Samindi; Ratnayake, R.M. Chandima (2015). Strengthening, modification and repair techniques' prioritization for structural integrity control of ageing offshore structures. Reliability Engineering & System Safety. ISSN 0951-8320. Volum 135. s. 15-26. DOI: 10.1016/j.ress.2014.10.023.
  • Samarakoon, Samindi; Sælensmide, Jan (2015). Condition assessment of reinforced concrete structures subject to chloride ingress: A case study of updating the model prediction considering inspection data. Cement & Concrete Composites. ISSN 0958-9465. Volum 60. s. 92-98. DOI: 10.1016/j.cemconcomp.2015.03.011.
  • Samarakoon, Samindi; Vie, Ørjan Sletbakk; Fjelldal, Remi Kleiven (2015). Self-Compacting White Concrete Mix Design Using the Particle Matrix Model. World Academy of Science, Engineering and Technology. ISSN 1307-6892. Volum 9. Hefte 7. s. 747-751.
  • Ratnayake, R.M. Chandima; Samarakoon, Samindi; Gudmestad, Ove Tobias (2014). Use of Technology Qualification in Offshore Oil and Gas Operations: An FMECA Analysis for Mitigating Potential Failures. I: ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering Volume 5: Materials Technology; Petroleum Technology San Francisco, California, USA, June 8–13, 2014. ASME Press. ISBN 978-0-7918-4545-5.
  • Samarakoon, Samindi; Ratnayake, R.M. Chandima (2014). Improving the efficiency of technology qualification in the industrial sector. International Journal of Continuing Engineering Education and Life-Long Learning. ISSN 1560-4624. Volum 24. Hefte 3/4. s. 362-376. DOI: 10.1504/IJCEELL.2014.063084.
  • Ratnayake, R.M. Chandima; Samarakoon, Samindi (2013). Structural integrity control of ageing offshore structures: prioritizing smr scheme/technique for damaged structures. I: Proceedings of the Special Session on Structural Health Monitoring, 14th December 2013, Volume 01. University of Peradeniya, Sri Lanka. ISBN 978-955-589-179-0. s. 53-65.
  • Samarakoon, Samindi; Ratnayake, R.M. Chandima (2013). In-Service Inspection of Offshore Concrete Structures: Application of an Expert System. IEEE International Conference on Industrial Engineering and Engineering Management. ISSN 2157-3611.
  • Samarakoon, Samindi; Ratnayake, R.M. Chandima (2013). Use of Engineering Robust Design Approach to Improve the Surface Quality of Pre-cast Concrete Elements: An Experimental Approach. IEEE International Conference on Industrial Engineering and Engineering Management. ISSN 2157-3611.
  • Samarakoon, Samindi; Ratnayake, R.M. Chandima (2013). Residual Service Life Prediction of Offshore Concrete Structures with Chloride-Induced Damage: The State Of The Art. I: ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering. ASME Press. ISBN 978-0-7918-5535-5.
  • Samarakoon, Samindi; Ratnayake, R.M. Chandima; Siriwardane, S.A.Sudath C (2013). Structural Integrity Control of Ageing Offshore Structures: Repairing and Strengthening with Grouted Connections. I: ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering. ASME Press. ISBN 978-0-7918-5535-5.
  • Samarakoon, Samindi; Sæleensminde, Jan; Helle, Cecilie M. (2013). Durability of reinforced concrete structures subject to chloride ingress: comparison of model prediction with outcome of inspection data. I: Proceedings of the Special Session on Structural Health Monitoring, 14th December 2013, Volume 01. University of Peradeniya, Sri Lanka. ISBN 978-955-589-179-0. s. 144-153.
  • Samarakoon, Samindi; Markeset, Tore; Gudmestad, Ove Tobias (2012). Life Cycle Costing as a Tool for Selecting the Best Available and Qualified Technique for Managing Physical Assets Read more: http://www.ijpe-online.com/may-2012-p3-life-cycle-costing-as-a-tool-for-selecting-the-best-available-and-qualified-technique-for-managing-physical-assets.html#ixzz2FIxbSdR6. International Journal of Performability Engineering. ISSN 0973-1318. Volum 8. Hefte 3. s. 249-264.
  • Ratnayake, R.M. Chandima; Samarakoon, Samindi; Gudmestad, Ove Tobias (2011). Integrity management for sustainable asset operations : the role of qualification processes. I: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostics Engineering Management (COMADEM2011). COMADEM International. ISBN 0-9541307-2-3. s. 711-721.
  • Ratnayake, R.M. Chandima; Samarakoon, Samindi; Markeset, Tore (2011). Maintenance Integrity: Managing Flange Inspections On Aging Offshore Production Facilities (OMAE2011-49050). I: 30th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2011) - Vol. III. ASME Press. ISBN 978-0-7918-4435-9.
  • Samarakoon, Samindi; Gudmestad, Ove Tobias (2011). On the Necessity of Technology Qualification in the Offshore Wind Energy Industry. I: 30th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2011) - Vol. V. ASME Press. ISBN 978-0-7918-4437-3.
  • Samarakoon, Samindi; Gudmestad, Ove Tobias (2011). The IPPC directive and technique qualification at offshore oil and gas installations. Journal of Cleaner Production. ISSN 0959-6526. Volum 19. Hefte 1. s. 13-20. DOI: 10.1016/j.jclepro.2010.08.014.
  • Gudmestad, Ove Tobias; Samarakoon, Samindi (2010). Retaining the sustainability of oil and gas operations : qualifying the best available techniques. I: 29th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2010) : Shanghai, China, June 6-11, 2010. ASME Press. ISBN 978-0-7918-3873-0.
  • Samarakoon, Samindi; Gudmestad, Ove Tobias (2010). Air pollution control in new offshore oil and gas developments using best available techniques. Wit Transactions on Ecology and The Environment. ISSN 1743-3541. Hefte 136. DOI: 10.2495/AIR100091.
  • Samarakoon, S.M.S.M.K; Gudmestad, Ove Tobias; Melhus, M.S.L. (2009). Qualification of offshore facilities prior to application in a new field. I: Management of Natural Resources, Sustainable Development and Ecological Hazards II Edited by: C.A. Brebbia, N. Jovanovic & E. Tiezzi. WIT Press. ISBN 9781845642044. s. 85-95.
  • Ratnayake, R.M. Chandima; Samarakoon, Mudiyansele Samindi Manjula K (2017). Structural Integrity Assessment and Control of Ageing Onshore and Offshore Structures.. IGI Global. ISBN 9781522505884. 10 s.
  • Sælensmide, Jan; Samarakoon, Mudiyansele Samindi Manjula K (2016). Deterioration of concrete structures due to salt crystallization; influence of salt types and relative humidity. RILEM; 2016-08-22 - 2016-08-24.
  • Samarakoon, Samindi; Sletbakk, Ørjan; Fjelldal, Remi Kleiven (2015). Self-Compacting White Concrete Mix Design Using the Particle Matrix Model. World Academy of Science, Engineering and Technology; 2015-07-04 - 2015-07-05.
  • Ratnayake, R.M. Chandima; Samarakoon, Samindi; Gudmestad, Ove Tobias (2014). Use of Technology Qualification in Offshore Oil and Gas Operations: An FMECA Analysis for Mitigating Potential Failures. ASME; 2014-06-08 - 2014-06-13.
  • Ratnayake, R.M. Chandima; Samarakoon, Samindi (2013). STRUCTURAL INTEGRITY CONTROL OF AGEING OFFSHORE STRUCTURES: PRIORITIZING SMR SCHEME/TECHNIQUE FOR DAMAGED STRUCTURES. 2013-12-13 - 2013-12-15.
  • Samarakoon, Samindi; Ratnayake, R.M. Chandima (2013). In-Service Inspection of Offshore Concrete Structures: Application of an Expert System. IEEE; 2013-12-10 - 2013-12-13.
  • Samarakoon, Samindi; Ratnayake, R.M. Chandima (2013). Residual Service Life Prediction of Offshore Concrete Structures with Chloride-Induced Damage: The State Of The Art. ASME; 2013-06-09 - 2013-06-14.
  • Samarakoon, Samindi; Ratnayake, R.M. Chandima (2013). Use of Engineering Robust Design Approach to Improve the Surface Quality of Pre-cast Concrete Elements: An Experimental Approach. IEEE; 2013-12-10 - 2013-12-13.
  • Samarakoon, Samindi; Ratnayake, R.M. Chandima; Siriwardane, S.A.Sudath C (2013). Structural Integrity Control of Ageing Offshore Structures: Repairing and Strengthening with Grouted Connections. ASME; 2013-06-09 - 2013-06-14.
  • Samarakoon, Samindi; Sæleensminde, Jan; Myklebust Helle, Cecilie (2013). DURABILITY OF REINFORCED CONCRETE STRUCTURES SUBJECT TO CHLORIDE INGRESS: COMPARISON OF MODEL PREDICTION WITH OUTCOME OF INSPECTION DATA. 2013-12-13 - 2013-12-15.
  • Ratnayake, R.M. Chandima; Samarakoon, Samindi; Markeset, Tore (2011). Maintenance Integrity: Managing Flange Inspections On Aging Offshore Production Facilities (OMAE2011-49050). American Society of Mechanical Engineers (ASME); 2011-06-19 - 2011-06-24.
  • Samarakoon, S.M.S.M.K; Gudmestad, Ove Tobias (2009). Qualification of offshore facilities prior to application in a new field. 2009-07-01 - 2009-07-03.