Et profilbilde

Professor
Kenneth Alasdair Macdonald { "honorific-suffix": "Professor", "fn": "Kenneth Alasdair Macdonald", "tel": "Telefon: 51831914", "email": "kenneth.macdonald@uis.no" }

Avdeling/enhet Det teknisk- naturvitenskapelige fakultet
Institutt/senter Institutt for maskin, bygg og materialteknologi
Rom KE E-243

Forskningsområder

Utvalgte publikasjoner

Pågående forskning

Arbeidserfaring

Vitenskapelige publikasjoner (fra CRISTin)

  • Cosham, Andrew; Macdonald, Kenneth Alasdair; Hadley, Isabel; Moore, Philippa (2017). ECAs: Lifting the Lid of the Black Box. I: ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering - Volume 5B: Pipelines, Risers, and Subsea Systems. ASME Press. ISBN 978-0-7918-5770-0.
  • Horn, Agnes Marie; Macdonald, Kenneth Alasdair (2017). A Tribute to the Extraordinary Research Work Within the Domain of Fatigue and Fracture of Offshore and Ship Structures Carried Out by Prof. Stig Berge and Per Jahn Haagensen at the Norwegian University of Science and Technology. I: ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering - Volume 4: Materials Technology. ASME Press. ISBN 978-0-7918-5768-7.
  • Wormsen, Anders; Fjeldstad, Arne; Kirkemo, Finn; Muff, Anthony David; Reinås, Lorents; Macdonald, Kenneth Alasdair (2016). Fatigue analysis of low alloy steel forgings used in the subsea industry. International Journal of Fatigue. ISSN 0142-1123. Volum 96. s. 43-66. DOI: 10.1016/j.ijfatigue.2016.11.005.
  • Wormsen, Anders; Kirkemo, Finn; Macdonald, Kenneth Alasdair; Reinås, Lorents; Muff, Anthony David; Gulbrandsen, Egil; Fjeldstad, Arne (2016). Fatigue testing and analysis of cathodically protected notched specimens tested in a fully aerated aqueous 3.5% NaCl solution. International Journal of Fatigue. ISSN 0142-1123. Volum 95. s. 168-184. DOI: 10.1016/j.ijfatigue.2016.10.016.
  • Wormsen, Anders; Avice, M.; Fjeldstad, Arne; Reinås, Lorents; Macdonald, Kenneth Alasdair; Berg, Espen; Muff, A D (2015). Fatigue testing and analysis of notched specimens with typical subsea design features. International Journal of Fatigue. ISSN 0142-1123. Volum 81. s. 275-298. DOI: 10.1016/j.ijfatigue.2015.08.004.
  • Wormsen, Anders; Avice, M.; Fjeldstad, Arne; Reinås, Lorents; Macdonald, Kenneth Alasdair; Muff, A D (2015). Base material fatigue data for low alloy forged steels used in the subsea industry. Part 1: In air S–N data. International Journal of Fatigue. ISSN 0142-1123. Volum 80. s. 477-495. DOI: 10.1016/j.ijfatigue.2015.07.007.
  • Wormsen, Anders; Avice, M.; Gulbrandsen, Egil; Reinås, Lorents; Macdonald, Kenneth Alasdair; Muff, A D (2015). Base material fatigue data for low alloy forged steels used in the subsea industry. Part 2: Effect of cathodic protection. International Journal of Fatigue. ISSN 0142-1123. Volum 80. s. 496-508. DOI: 10.1016/j.ijfatigue.2015.07.008.
  • Macdonald, Kenneth Alasdair (2011). Introduction. I: Fracture and fatigue of welded joints and structures. Woodhead Publishing Limited. ISBN 978-1-84569-513-2. s. 1-13.
  • Macdonald, Kenneth Alasdair; Østby, Erling (2011). Constraint fracture mechanics : test methods. I: Fracture and fatigue of welded joints and structures. Woodhead Publishing Limited. ISBN 978-1-84569-513-2. s. 31-59.
  • Macdonald, Kenneth; Haagensen, Per Jahn (2009). Fatigue of welded aluminium hollow section profiles. Engineering Failure Analysis. ISSN 1350-6307. Volum 16. Hefte 1. s. 254-261.
  • Cosham, A.; Hopkins, P.; Macdonald, Kenneth (2007). Best practice for the assessment of defects in pipelines - Corrosion. Engineering Failure Analysis. ISSN 1350-6307. Volum 14. s. 1245-1265.
  • Macdonald, Kenneth; Bjune, John Vegar (2007). Failure analysis of drillstrings. Engineering Failure Analysis. ISSN 1350-6307. Volum 14. s. 1641-1666.
  • Macdonald, Kenneth; Cosham, A.; Alexander, C.R.; Hopkins, P. (2007). Assessing mechanical damage in offshore pipelines - Two case studies. Engineering Failure Analysis. ISSN 1350-6307. Volum 14. s. 1667-1679.
  • Macdonald, Kenneth; Cosham, A. (2005). Best practice for the assessment of defects in pipelines - gouges and dents. Engineering Failure Analysis. ISSN 1350-6307. Volum 12. s. 720-745.
  • Macdonald, Kenneth Alasdair (2011). Fracture and fatigue of welded joints and structures. Woodhead Publishing Limited. ISBN 978-1-84569-513-2. 338 s.
  • Pereboom, H; Pijpers, R; van Beek, P; Macdonald, Kenneth Alasdair (2015). Remaining fatigue life time assessment of welded and braced side branches. ASME; 2015-07-19 - 2015-07-23.
  • van Beek, P; Pijpers, R; Macdonald, Kenneth Alasdair; Maljaars, Johan; Lunde, Knud; Korst, H; Hansen, F (2014). A novel high cycle fatigue assessment of small-bore side branches: tailor-made acceptable vibration levels based on the remaining life of existing structures. ASME; 2014-07-20 - 2014-07-24.
  • Jones, Richard; Karunakaran, Daniel; Mair, John; Macdonald, Kenneth Alasdair (2011). Fatigue of Girth Welds in Reeled Clad Steel Catenary Risers. CETIM; 2011-11-23 - 2011-11-24.
  • Macdonald, Kenneth (2010). Setting acceptance levels for flaws in the complex girth welds of clad and lined linepipe materials. 2010-07-04 - 2010-07-07.
  • Macdonald, Kenneth (2010). When Old Becomes new. 2010-07-04 - 2010-07-07.
  • Macdonald, Kenneth; cheaitani, Mohamad (2010). IPC2010-31627 Engineering Critical Assessment in the Complex Girth Welds of Clad and Lined Linepipe Materials. 2010-09-27 - 2010-10-01.
  • Macdonald, Kenneth; Russell, Craig (2010). IPC2010-31626 Design and Welding Challenges in the Infield Flowlines of the EnCana Deep Panuke Development. 2010-09-27 - 2010-10-01.
  • Macdonald, Kenneth; Cosham, A. (2008). Fracture Control in Pipelines under High Plastic Strains ¿ A Critique of DNV-RP-F108 IPC2008-64348, Fracture Control in Pipelines under High Plastic Strains ¿ A Critique of DNV-RP-F108. 2008-09-29 - 2008-10-03.
  • Macdonald, Kenneth; Cosham, A. (2008). Strain localisation and local buckling in pipelines. 2008-07-13 - 2008-07-16.
  • Macdonald, Kenneth; Lange, Hans Iver (2008). Engineering Critical Assessment for Thin-Wall Offshore Pipelines IPC2008-64188, Engineering Critical Assessment for Thin-Wall Offshore Pipelines. 2008-09-29 - 2008-10-03.
  • Macdonald, Kenneth; Milne, Grant D (2008). Installation failure of offshore pipelines under high plastic strain. 2008-07-13 - 2008-07-16.
  • Macdonald, Kenneth; Haagensen, Per Jahn (2007). Fatigue of Welded Connections in Extruded Aluminium Hollow Section Profiles. 2007-11-21 - 2007-11-22.
  • Macdonald, Kenneth; Bjune, John Vegar (2006). Drillstring Failure Analysis. 2006-09-13 - 2006-09-15.
  • Macdonald, Kenneth; Cosham, A. (2006). Assessing mechanical damage in pipelines - two case studies. 2006-09-13 - 2006-09-15.
  • Macdonald, Kenneth (2005). Developments in Design Guidance for HISC Strain Limits DNV RP-B401 (2005): Cathodic Protection Design. 2005-04-05.
  • Macdonald, Kenneth (2005). Failure Investigations and Developments in Design Guidance for HISC Strain Limits. Pipeline Industries Guild - North Scottish Section; 2005-02-08.
  • Macdonald, Kenneth (2004). Best practice for the assessment of defects in pipelines. 2004-07-12 - 2004-07-14.
  • Macdonald, Kenneth (2004). Defects in pipelines. 2004-07-12.