Et profilbilde

Instituttleder
Tore Markeset { "honorific-suffix": "Instituttleder", "fn": "Tore Markeset", "tel": "Telefon: 5183 2191", "email": "tore.markeset@uis.no" }

Avdeling/enhet Det teknisk- naturvitenskapelige fakultet
Institutt/senter Institutt for industriell økonomi, risikostyring og planlegging
Rom KE D-435
Hjemmeside http://www.uis.no/faculties-departments-and-centres/faculty-of-science-and-technology/department-of-industrial-economics-risk-management-and-planning/
Merknader CV updated June, 2017

Curriculum Vitae

Professor Markeset (Dr. Ing.) serves as Head of the Department of Industrial economics, Risk management and Planning. Currently he also serves as Interim Head of the Department of Petroleum engineering, both at the Faculty of Science and Technology at the University of Stavanger (UiS), Stavanger, Norway

He is a Professor of Mechanical Engineering (Operations and Maintenance) at the UiS and Adjunct Professor in Operation and Maintenance at University of Tromsø, both in Norway. He received a BSc degree in petroleum engineering from the University of Stavanger in 1985, a BSc and MSc degree in mechanical engineering from the University of Minnesota, USA, in 1989 and 1991 respectively. After working in the industry for a number of years within process, mechanical and reservoir engineering, he attained a PhD degree in Offshore Technology ? Operations and Maintenance from the University of Stavanger. 

Markeset has played a central role in establishing several master degrees as well as master degree courses in industrial asset management at the University of Stavanger and at the University of Tromsø. His research interests include: industrial services (product support, innovation, strategy development, sourcing strategies, contractual relationship performance, subsea services, etc.) and industrial asset management (operations, maintenance and support management, design for performance and production performance management).

Markeset has successfully supervised 13 PhD, over 100 MSc and BSc theses, and is currently the main supervisor of 1 and co-supervisor of 3 PhD projects. He has participated in publishing more than 150 publications in international journals, conference proceedings, theses and reports. He serves on the Editorial Board of Journal of Quality in Maintenance Engineering (JQME); the International Journal of Systems Assurance Engineering and Management (IJSAEM); The International Journal of Logistics and Transport (IJLT) and the Operations and Supply Chain Management Journal (OSCM). He also served as a Special Issue Editor for the International Journal of Services Technology and Management and as Ad-hoc Reviewer for International Journal of Service Industry Management, International Journal of Production Economics, Journal of Risk and Reliability, Production planning and Control: The Management of Operations.

RESEARCH INTERESTS

Industrial services: Product support, Service strategy development, Sourcing strategies, Subsea services, Operation and maintenance services, Service innovation management
Operations and maintenance: Operations and maintenance, engineering and management, Design for performance (functional capacity, capability, reliability, availability, maintainability, supportability, HSE, deliverability), Risk based maintenance (RBM), Risk based inspections (RBI), Operation and maintenance in Arctic environments

ACADEMIC AND PROFESSIONAL POSITIONS

  • Head, Dept. of Industrial economics, Risk management and Planning, Faculty of Science and Technology, University of Stavanger (UiS), 2014/10?present
  • Interim Head, Dept. of Petroleum engineering, Faculty of Science and Technology, University of Stavanger (UiS), 2016/8?present
  • Professor of Mechanical Engineering (Operations and Maintenance), Department of Mechanical and Structural Engineering and Material Science, University of Stavanger (UiS), 2009/9?present. Associate Professor in same area and department from 2003/5 to 2009/8
  • Adjunct Professor (20% position), Department of Engineering and Safety, 2010/1?present, Adjunct Assoc. Prof. 2009/1?2009/12 (UiT), 2007/12?2008/12 (Tromsø University college  - now merged with University of Tromsø), University of Tromsø (UiT)
  • Guest Professor, University of Houston (UH), Houston, Texas, Sabbatical leave, 2013/10-2014/09
  • Member of the Board and Project manager, 2005/4-2013/9, Executive leader and project advisor: 2003/12 ? 2005/04, CIAM (Center for Industrial Asset Management), University of Stavanger
  • Doctoral Student in Offshore Engineering, Operations and Maintenance, 1999/8?2003/6, Stavanger University College (now University of Stavanger)
  • Senior process/ mechanical engineer, Stavanger and Bergen, Norway, 1997/3?2003/5, Kværner Oil and Gas (now AkerSolutions)
  • Computer specialist in the Norwegian Logistics Battalion, Modrica and Tuzla, Bosnia Herzegovina, 1996/1?1997/2, NATO: Peace Implementation Force (IFOR)/ Peace Stabilization Force (SFOR)
  • Senior R&D Engineer, Ulsteinvik, Norway, 1994/6?1997/2, Ulstein Propeller (now Rolls Royce):
  • Reservoir Research Engineer, Palo Alto, California, USA, 1991/1?1994/2 + summer 1990, Reservoir Engineering Research Institute (RERI)
  • Reservoir Research Engineer, Bergen, Norway, 1985/8?1987/9 + Summers of 1985, 88, 89, Norsk Hydro Research Center (now Statoil)
EDUCATION
  • Dr. Ing., Offshore Technology ? Operations and Maintenance, Stavanger University College (now University of Stavanger): 1999-2003
  • MSME (MSc in Mech. Eng.), Mechanical Engineering, Design and Controls, University of Minnesota: 1989-91
  • BME (Bachelor of Mech. Eng.), Mechanical Engineering, Design and Controls, University of Minnesota: 1987-89
  • One year study in Petroleum Engineering on the top of a 2 year study in Mechanical engineering from Bergen University College, Qualifies to a BSc in Petroleum Engineering, Stavanger Regional College: (later Stavanger University College, now University of Stavanger), 1984-85
  • Two year Degree in Mechanical engineering, Bergen University College: 1982-84
PHD SUPERVISION
  1. Dr. Mayang Kusumawardhani: 2013-2016, Main Supervisor. PhD thesis: Kusumawardhani (2016) Asset Integrity Management Challenges, planning and implementations, PhD thesis UiS; 306, ISBN: 978-82-7644-665-4, ISSN: 1890-1387, http://hdl.handle.net/11250/2410898, Consultant in Asset Integrity, Trancergy AS 
  2. Dr. A.M.N.D.B. Seneviratne: 2012-2015, Co-supervisor. Risk Based In-Service Inspection Planning: Modeling, Integration and Mechanization, Researcher, Luleå University of Technology
  3. Dr. Jorge Moreno-Trejo: 2009-2012, Main supervisor. Thesis: Moreno-Trejo, J. (2012), Subsea Production Systems and Services: Concept selection, Installation and Maintenance, PhD thesis UiS No. 170, ISBN 978-82-7644-503-9, ISSN 1890-1387. He is employed in Aker Subsea technology, Oslo, Norway.
  4. Dr. Knut Erik Bang: 2009-2012, Main supervisor. Thesis: Bang, K.E. (2012), Globalization and Changes to Companies? Competitive Environment, PhD Thesis UiS No. 169, University of Stavanger, ISBN: 978-82-7644-502-2, ISSN: 1890-1387, He is employed as Associate Professor at University of Stavanger, Stavanger.
  5. Dr. Abbas Barabadi: 2008?2011, Main supervisor. Thesis: Barabadi, A. (2011) Production Performance Analysis: Reliability, Maintainability and Operational Conditions, PhD Thesis UiS No. 144, University of Stavanger, ISBN 978-82-7644-471-1, ISSN 1890-1387. He is employed as Associate Professor at University of Tromsø, Tromsø.
  6. Dr. S.M. Samindi M.K. Samarakoon: 2009-2011, Co-supervisor. Thesis: Samarakoon, S.M.K. (2011), Qualification of Best Available Techniques: Economic, Health, Safety and Environmental Considerations, PhD Thesis UiS No. 140, University of Stavanger, ISBN 978-82-7644-467-4, ISSN 1890-1387. She is employed as Associate Professor at University of Stavanger, Stavanger.
  7. Dr. Dina Kayrbekova: 2007?2011, Main supervisor. Thesis: Kayrbekova, D. (2011). Activity-Based Life-Cycle-Cost Analysis: Design, Operation and Maintenance in Arctic Environment, PhD thesis No. 134, University of Stavanger, ISBN 978-82-7644-459-9, ISSN 1890-1387. She is employed in GDF Suez E&P Norge, Stavanger.
  8. Dr. Xueli Gao: 2006?2009, Main supervisor. Thesis: Gao, X. (2009). Design for Production Performance: Reliability, Maintainability and Arctic Conditions, PhD Thesis UiS No 85, University of Stavanger, ISBN 978-82-7644-394-3, ISSN 1890-1387. She is employed by Aker Engineering & Technology, Oslo.
  9. Dr. R.M. Chandima Ratnayake: 2008?2009, Main Supervisor. Thesis: Ratnayake, C. (2009). Industrial asset integrity management: Sustainability, Balanced performance and Organizational alignment. PhD Thesis UiS No 86, University of Stavanger, ISBN 978-82-7644-395-0, ISSN 1890-1387. He is employed as Professor at University of Stavanger. 
  10. Dr. Maneesh Singh: 2006?2009, Main supervisor. Thesis: Singh, M. (2009). Evaluation of Structural Integrity of Corroded Oil and Gas Pipes, PhD Thesis UiS No 67, ISBN 978-82-7644-371-4, ISSN 1890-1387. This is Dr Singh?s second PhD. He also holds a PhD in Material Science from Luleå University of Technology (2003). Maneesh is employed Professor at the Bergen University College.
  11. Dr. Sukhvir Singh Panesar: 2005?2007. Main supervisor. Thesis: Panesar, S.S. (2007). Industrial Service Innovations: Practices, Processes and Service Relationships, PhD Thesis UiS No 46, University of Stavanger, ISBN 978-82-7644-339-4, ISSN 1890-1387. He is employed by ApplySørco AS, Stavanger
  12. Dr. Javad Barabady: 2006?2007, Co-supervisor. Thesis: Barabady, J. (2007). Production Assurance: Concepts, Implementation and Execution, PhD No. 2007:51, Luleå University of Technology, Sweden, ISSN 1402-1544, ISRN LTU-D-07/51-SE. He is employed as Professor at the University of Tromsø. 
  13. Dr. Rajesh Kumar: 2004?2006. Main supervisor. Thesis: Kumar, R. (2005). Industrial Service Strategy: Development, Implementation and Execution, PhD Thesis UiS No 19, University of Stavanger, ISBN 82-7644-278-1, ISSN 0809-6775. He is employed by ConocoPhillips, Stavanger
  14. Mr. Nii Nortey Clarence Basil Lokko: 2012-present, Main Supervisor. Optimizing periodic preventive maintenance strategies through condition monitoring.
  15. Mr. Knut Espen Solberg: 2015-present, Co-supervisor. Energy efficient cold climate operation and winterization solutions 
  16. Mr. Andika Rachman Yahya: 2016-present. Co-supervisor. Use of Lean Six Sigma Concepts for Improving the Productivity of Mechanical Integrity Assurance Processes: Manufacturing Industry to Process Industry
PUBLICATIONS
Papers in process to be submitted or accepted for publishing 
  1. Barabady, J, Gao, X, and Markeset, T (2017), Criticality analysis from maintainability point of view, Submitted for conference
Papers in international peer reviewed journals
  1. Kusumawardhani, M., Kumar, R and Markeset, T (2016), Establishing operational readiness and assurance for petroleum project, Accepted for publication in Journal of Quality in Maintenance Engineering 
  2. Kusumawardhani, M., Kumar, R and Markeset, T (2016), Development of strategic asset integrity planning in the petroleum industry, Journal of Quality in Maintenance Engineering, Vol. 23 Issue: 2, pp.165-179, doi: 10.1108/JQME-04-2016-0016
  3. Kusumawardhani, M., Gundersen, S. and Markeset, T (2017). Mapping the research approach of asset management studies in the petroleum industry, Journal of Quality in Maintenance Engineering, Vol 23, Issue 1, pp. 57-70, doi: 10.1108/JQME-07-2015-0031 
  4. Kusumawardhani, M., Kumar, R and Markeset, T (2016), Asset integrity management: offshore installations challenges, Journal of Quality in Maintenance Engineering, Volume 22 Issue 3, pp. 238 - 251, doi: 10.1108/JQME-06-2015-0023, (Highly commended paper for the Outstanding Paper award, in the 2017 Emerald Literati Network Awards for Excellence), http://www.emeraldgrouppublishing.com/authors/literati/awards.htm?year=2017&journal=jqme   
  5. Gudmestad, O.T. and Markeset, T. (2015), Oil and gas operations under extreme conditions in the cold north, International Journal of Computational Methods and Experimental Measurements, Volume 3, Issue 1, WIT Press, Southampton
  6. Kusumawardhani, M, and Markeset, T (2015 ), Asset integrity knowledge management: a case study from the petroleum industry, Operations and Supply Chain Management: An International Journal, Vol 8, Issue 3, pp 146-153
  7. Uyiomendo, E.E. and Markeset, T. (2015), Subsea maintenance service delivery: a multi-variable analysis model for predicting potential delays in scheduled services, Journal of Quality in Maintenance Engineering, Vol 21, Issue 1, pp. 34-54 (winner of the Outstanding Paper award in the 2016 Emerald Literati Network Awards for Excellence,http://www.emeraldgrouppublishing.com/authors/literati/awards.htm?year=2016&journal=jqme )
  8. Markeset, T, Sæland, A.C., Gudmestad, O.T. and Barabady, J. (2015), [Book Chapter] Petroleum production facilities in Arctic operational environments, In: Bourmistrov, A., Mellemvik, F., Bambulyak, A., Gudmestad, O. T., Overland, I., Zolotukhin, A. (Eds.), International Cooperation and Arctic Petroleum: Barents Sea Scenarios
  9. Singh, M. and Markeset, T. (2014), Handling of variability in probabilistic and possibilistic failure analysis of corroded pipes, DOI 10.1007/s13198-013-0197-y, International Journal of System Assurance Engineering and Management, ISSN 0975-6809, Vol 5, Issue 4, pp. 503-512
  10. Singh, M. and Markeset, T. (2014), Hybrid models for handling of variability and uncertainty in probabilistic and possibilistic failure analysis of corroded pipes, Engineering Failure Analysis, Engineering Failure Analysis, Available online April 13, http://dx.doi.org/10.1016/j.engfailanal.2014.04.008
  11. Barabadi, A., Barabady, J. and Markeset, T. (2014), Application of reliability models with covariates in spare part prediction and optimization - A case study, Reliability Engineering & System Safety, Volume 123, March 2014, Pages 1-7, http://dx.doi.org/10.1016/j.ress.2013.09.012 
  12. Singh, M., Markeset, T. and Kumar, U. (2013), Some philosophical issues in modeling corrosion of oil and gas pipelines, DOI 10.1007/s13198-013-0192-3, International Journal of System Assurance Engineering and Management, ISSN 0975-6809, Vol 5, Issue 1, pp 55-74
  13. Singh, M. and Markeset, T. (2013), Simultaneous handling of variability and uncertainty in probabilistic and possibilistic failure analysis of corroded pipes, DOI 10.1007/s13198-013-0202-5, International Journal of Systems Assurance Engineering and Management, ISSN 0975-6809, Vol 5, Issue 1, pp 43-54
  14. Markeset, T., Moreno-Trejo, J., Kumar, R. (2013), Maintenance of Subsea Petroleum Production Systems: A Case Study, Journal of Quality in Maintenance Engineering, DOI 10.1108/13552511311315940, Vol. 19 No. 2, pp. 128-143
  15. Moreno-Trejo, J., Kumar, R. and Markeset, T. (2012), Mapping Factors Influencing the Selection of Subsea Petroleum Production Systems ? A Case Study, International Journal of System Assurance Engineering  and Management, DOI 10.1007/s13198-012-0090-0, Vol. 3, Issue 1, pp. 6-16
  16. Moreno-Trejo, J., Kumar, R. and Markeset, T. (2012), System Assurance of Subsea Petroleum Production Systems: A Case Study Mapping Factors Influencing the Sourcing Strategy, International Journal of Systems Assurance Engineering and Management, DOI: 10.1007/s13198-012-0108-7, Vol. 3, Issue 3, pp. 255-265
  17. Moreno-Trejo, J., Kumar, R., Markeset, T. (2012), Factors Influencing the Installation and Maintenance of Subsea Petroleum Production Equipment: A Case Study, Journal of Quality in Maintenance Engineering, Vol 18, Issue 4, pp. 454 - 471
  18. Ratnayake, C. and Markeset, T. (2012), Asset Integrity Management Towards Sustainable Performance, MaintWorld, No. 1, pp. 18-22
  19. Kumar, R., Barabady, J., Markeset, T. and Kumar, U. (2012), Improving Maintainability in Extreme Cold Climatic Conditions, International Journal of Performability Engineering, Vol. 8, No. 5, September, pp. 563-572
  20. Samarkoon, S.M.K., Markeset, T. and Gudmestad, O.T. (2012), Life Cycle Costing as a Tool for Selecting the Best Available and Qualified Technique for Managing Physical Assets, International Journal of Performability Engineering, Vol 8, No 3, May 2012, pp. 249-264
  21. Ratnayake, R.M.C. and Markeset, T. (2012), Asset Integrity Management for Sustainable Industrial Operations: Measuring the Performance, International Journal of Sustainable Engineering, DOI:10.1080/19397038.2011.581391, Volume 5, Issue 2, pp. 145-158
  22. Barabadi, A. and Markeset, T. (2011), Reliability and Maintainability Performance under Arctic Conditions, International Journal of System Assurance Engineering and Management, DOI 10.1007/s13198-011-0071-8, September, Volume 2, Issue 3, pp 205-217
  23. Barabadi, A., Barabady, J. and Markeset, T. (2011), A Methodology for Throughput Capacity Analysis of a Production Facility Considering Environment Condition, Reliability Engineering & System Safety, Vol. 96, Issue 12, pp. 1637-1646.
  24. Barabadi, A., Barabady, J. and Markeset, T. (2011), Maintainability Analysis Considering Time-Dependent and Time-Independent Covariates, Reliability Engineering & System Safety, Vol. 96, Issue 1, January, pp. 210-217
  25. Kayrbekova, D., Barabady, A. and Markeset, T. (2011), Maintenance Cost Evaluation and Uncertainty Analysis using Monte Carlo Simulation for a System to be Used in the Arctic Region, Journal of Quality in Maintenance Engineering, Vol. 17, No. 4, pp. 320-336
  26. Kayrbekova, D., Ghodrati, B. and Markeset, T. (2011), Activity-Based Life-Cycle Costing as an Alternative to Conventional LCC in Engineering Design, In: International Journal of System Assurance Engineering and Management, Vol. 2 No 2.
  27. Ghodrati, B., Markeset, T. and Ahmadi, A. (2011), Enhancement of Mining Machineries Performance through Supportability, International Journal of COMADEM, Vol. 14, No. 2, pp. 35-43
  28. Barabady, J., Markeset, T. and Kumar, U. (2010), Review and Discussion of Production Assurance Programs, International Journal of Quality and Reliability Management, Vol. 27, Issue 6, pp 702-720.
  29. Gao, X., Barabady, J. and Tore Markeset, T. (2010), An Approach for Prediction of Petroleum Production Facility Performance Considering Arctic Influence Factors, Reliability Engineering & System Safety, Volume 95, Issue 8, pp. 837-846.
  30. Uyiomendo, E.E. and Markeset, T. (2010), Subsea Maintenance Service Delivery: Mapping Factors Influencing Scheduled Service Duration, Special Section on Maintenance and Safety Management in Process Plants, International Journal of Automation and Computing (IJAC), Vol. 7 No. 2, pp. 167-172.
  31. Ratnayake, R.M.C. and Markeset, T. (2010), Technical Integrity Management: Measuring HSE Awareness Using AHP in Selecting a Maintenance Strategy, Journal of Quality in Maintenance Engineering, Vol. 16, No. 1.
  32. Ratnayake, R.M.C. and Markeset, T. (2010), Implementing Company Policies in Plant Level Asset Operations: Measuring Organizational Alignment, European Journal of Industrial Engineering, Vol. 4, No. 3. pp. 355-371
  33. Barabady, J., Markeset, T. and Kumar, U. (2010), A Framework for Improvement of Production Plant Performance using Production Assurance Programs, International Journal of Systems Assurance Engineering and Management, Vol. 1, No 1, pp. 59-65.
  34. Gao, X., Barabady, J. and Tore Markeset, T. (2010), Criticality Analysis of a Production Facility using Cost Importance Measures, International Journal of Systems Assurance Engineering and Management, Vol 1, No 1, pp. 17-23.
  35. Singh, M. and Markeset, T. (2009), A Methodology for Risk-based Inspection Planning of Oil and Gas Pipes Based on Fuzzy Logic Framework, Engineering Failure Analysis, Vol. 16, pp. 2098-2113
  36. Kumar, R., Panesar, S.S. and Markeset, T. (2009), Development of Technical Integrity Management Services ? A Concept, Journal of Quality in Maintenance Engineering, Vol. 15, No. 3
  37. Markeset, T. and Kumar, U. (2009), Editorial ? Special issue: ?Developments in Industrial B2B Services?, International Journal of Services Technology and Management, Vol 11, No 1
  38. Panesar, S.S. and Markeset, T. (2009), Industrial Service Innovation Process: Influencing Factors ? A Case Study, International Journal of Services Technology and Management, Vol 11, No 1, pp. 82-102
  39. Markeset, T. (2008), Design for High Performance Assurance for Offshore Production Facilities in Remote Harsh and Sensitive Environment, Quarterly Journal of the Operational Research Society of India, OPSEARCH, Vol.45, No.3, September, pp. 275-290
  40. Gao, X., Markeset, T. and Barabady, J. (2008), Design and Operational Maintainability Importance Measure: A Case Study, Quarterly Journal of the Operational Research Society of India, OPSEARCH Vol. 45, No. 3, September, pp. 189-208
  41. Panesar, S.S. and Markeset, T. (2008), Industrial Service Innovation Through Improved Contractual Relationships: A Case Study, Journal of Quality in Maintenance Engineering, Volume 14 Issue 3
  42. Panesar, S.S., Markeset, T., and Kumar, R. (2008), Industrial Service Innovation Growth and Barriers, International Journal of Services Technology and Management, Vol. 9, No 2, pp. 174-193
  43. Panesar, S.S. and Markeset, T. (2008), Development of a Framework for Industrial Service Innovation Management and Coordination, Journal of Quality in Maintenance Engineering, Vol. 14, No. 2, pp. 177-193
  44. Kumar, R. and Markeset, T. (2007), Development of Performance-Based Service Strategies for the O&G Industry: A Case Study, Journal of Business and Industrial Marketing, Vol. 22, Issue 4
  45. Kumar, R., Markeset, T. and Kumar, U. (2006), Implementation and Execution of Industrial Service Strategy: A Case Study from the Oil and Gas Industry, Journal of Quality in Maintenance Engineering, Vol. 12, No. 2
  46. Markeset, T. and Kumar, U. (2005), Study of Product Support Strategy: Conventional versus Functional Products, Journal of Quality in Maintenance Engineering, Vol. 11, No. 1
  47. Kumar, R., Markeset, T. and Kumar, U. (2004), Maintenance of Machinery: Negotiating Service Contracts in Business-to-Business Marketing, International Journal of Service Industry Management, Vol. 15, No. 4
  48. Markeset, T. and Kumar, U. (2003), Design and Development of Product Support and Maintenance Concepts for Industrial Systems, Journal of Quality in Maintenance Engineering, Vol. 9, No. 4.
  49. Markeset, T. and Kumar, U. (2003), Integration of RAMS and Risk Analysis in Product Design and Development Work Processes: A Case Study, Journal of Quality in Maintenance Engineering, Vol. 9, No. 4. 
  50. Firoozabadi, A., Markeset, T. and Dindoruk, B. (1997), Viscous Crossflow in Fractured Porous Media, Journal of Canadian Petroleum Technology, October, Volume 36, No 9 50-62
  51. Firoozabadi, A. and Markeset, T. (1995), Laboratory Studies in Fractured Porous Media: Part I - Reinfiltration for Gas Liquid Systems, IN SITU, 19 (1), 1-21, February
  52. Firoozabadi, A. and Markeset, T. (1995), Laboratory Studies in Fractured Porous Media: Part II - Capillary Crossflow, IN SITU, 19 (1), 23-39, February.
  53. Firoozabadi, A. and Markeset, T. (1994), Fracture-Liquid Transmissibility in Fractured Porous Media, SPE Reservoir Engineering Journal, August. 
Papers in international conference proceedings with referee
  1. Bang, K.E. and Markeset, T. (2015), The Oncoming Waves of Competition, In: The 5th World Conference on Production and Operations Management (P&OM2016), Sept 6-10, Havana, Cuba
  2. Bang, K.E. and Markeset, T. (2015), Towards a New Type of Company: Changes in Company Assets and Core Activities and in Asset Management, In: The 5th World Conference on Production and Operations Management (P&OM2016), Sept 6-10, Havana, Cuba
  3. Bang, K.E. and Markeset, T. (2015), Measuring Changes in Outsourcing: A Case Study, In: The 5th World Conference on Production and Operations Management (P&OM2016), Sept 6-10, Havana, Cuba
  4. Balindres, AR, Kumar, R and Markeset, T (2016), Effects of Arctic Conditions on Human Performance, In: The Proceedings of the 7th International Conference on Applied Human Factors and Ergonomics  (AHFE2016), 27-31 July, Orlando, Florida, USA
  5. Kumar, R, Töres, T and Markeset, T (2016), Comparing Psychosocial Factors Associated with Job Stress among Administrative Staff and Cleaners, In: The Proceedings of the 7th International Conference on Applied Human Factors and Ergonomics (AHFE2016), 27-31 July, Orlando, Florida, USA
  6. Kusumawardhani, A. and Markeset, T. (2015), Asset integrity of deepwater petroleum production facilities, To appear In: The Proceedings of The IEEE International Conference on Industrial Engineering and Engineering Management (IEEM2014), December 09-12th, Selangor, Malaysia
  7. Lokko, N.N.B., Raza, J., Markeset, T. and Panesar, S.S. (2014), Practical challenges in determining periodic maintenance intervals on the Norwegian Continental Shelf (NCS): Some expert views and opinions, In: The proceedings of The Maintenance Performance Measurement and Management Conference (MPMM2014), September 4-5th, Coimbra, Portugal, ISBN: 978-972-8954-42-0, DOI: http://dx.doi.org/10.14195/978-972-8954-42-0
  8. Lokko, N.N.B., Raza, J., Markeset, T. and Panesar, S.S. (2014),Exploring the condition-based maintenance opportunities for production-critical assets, In: The proceedings of The Maintenance Performance Measurement and Management Conference (MPMM2014), October Coimbra, Portugal, ISBN: 978-972-8954-42-0, DOI: http://dx.doi.org/10.14195/978-972-8954-42-0 
  9. Kusumawardhani, A. and Markeset, T. (2014), Sourcing strategy for asset management support services of petroleum production facilities, To appear In: The Proceedings of The 6th International Conference on Operations and Supply Chain Management (OSCM2014), December 10-12th, Bali, Indonesia
  10. Kusumawardhani, A. and Markeset, T. (2014), Research design for industrial service studies, To appear In: The Proceedings of The 6th International Conference on Operations and Supply Chain Management (OSCM2014), December 10-12th, Bali, Indonesia
  11. Kusumawardhani, A. and Markeset, T. (2014), Information system challenges in managing asset integrity of  petroleum production facilities, To appear In: The Proceedings of The 6th International Conference on Operations and Supply Chain Management (OSCM2014), December 10-12th, Bali, Indonesia
  12. Moreno-Trejo, J. and Markeset, T. (2014), Power Distribution in Subsea Developments: a System Engineering Perspective, To appear in:  The Proceedings of the 2014 SPE Russian Oil & Gas Exploration and Production Technical Conference and Exhibition, 14-16 October, Moscow, Russia
  13. Ayele, Y.Z., Barabadi, A. and Markeset, T. (2013). Spare Part Transportation Management in High North, In: The Proceedings for the 22nd International Conference on Port and Ocean Engineering under Arctic Conditions (POAC2013), June 9-13th, Espoo, Finland
  14. Moreno-Trejo, J., Heras, E. and Markeset, T. (2013), Using HAZOP Analysis in the Maintenance, Modifications and Installation of Subsea Petroleum Production Systems, In: The Proceedings of the Annual Reliability and Maintainability Symposium (RAMS2013), DOI: 10.1109/RAMS.2013.6517771, Jan 28-31st, Orlando, Florida, USA
  15. Ang, H., Markeset, T. and Bang-Steinsvik, T.O. (2013), Condition Monitoring and Identification of Failure Modes of Subsea Electrical Equipment, In: The Proceedings of the Annual Reliability and Maintainability Symposium (RAMS2013), DOI: 10.1109/RAMS.2013.6517634, Jan 28-31st, Orlando, Florida, USA
  16. Ang, H., Markeset, T. and Bang-Steinsvik, T.O. (2012), Condition Monitoring of Oil and Gas Subsea Electrical Equipment - a Case Study of Åsgard Subsea Compression Project, In: The Proceedings of the 2nd International Workshop and Congress on eMaintenance (eMaintenance 2012), pp. 89-94, Dec 12-14th, Luleå, Sweden
  17. Barabadi, A., Ghodrati, B., Barabady, J. and Markeset, T. (2012), Reliability and Spare Parts Estimation Considering Operational Environments - A Case Study, In: The Proceedings of IEEE International Conference on Industrial Engineering and Engineering Management (IEEM2012), December 10-13th, Hong Kong, China
  18. Bencomo, A. and Markeset, T. (2012), Asset management challenges of offshore installations in Arctic regions, In: The Proceedings of the 31st International Conference on Ocean, Offshore and Arctic Engineering, OMAE2012, June 10-15th, Paper No: OMAE2012-83252, Rio de Janeiro, Brazil
  19. Kayrbekova, D., Panesar, S.S. and Markeset, T. (2012), Identification of Factors Causing Time and Cost Overruns in Offshore Petroleum Modification Projects, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at  APMS2011, September 26th-28th, 2011, Stavanger, Norway
  20. Bang, K. E. and Markeset, T. (2012), Identifying the Drivers of Economic Globalization and the Effects on Companies? Competitive Situation, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at APMS2011, September 26th-28th, 2011, Stavanger, Norway  
  21. Bang, K. E. and Markeset, T. (2012), Impact of Globalization on Model of Competition and Companies? Competitive Situation, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at APMS2011, September 26th-28th, 2011, Stavanger, Norway
  22. Homlong, E., Kayrbekova, D., Panesar, S.S. and Markeset, T. (2012), Assessing Maintenance Time, Cost and Uncertainty for Offshore Production Facilities in Arctic Environment, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at  APMS2011, September 26th-28th, 2011, Stavanger, Norway
  23. Palkar, S., Østgulen, K. and Markeset, T. (2012), Extending the Service Life Span of Ageing Oil and Gas Offshore Production Facilities, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at  APMS2011, September 26th-28th, 2011, Stavanger, Norway 
  24. Ravnestad, G., Panesar, S.S., Kayrbekova, D. and Markeset, T. (2012), Improving Periodic Preventive Maintenance Strategies Using Condition Monitoring Data, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at  APMS2011, September 26th-28th, 2011, Stavanger, Norway
  25. Moreno-Trejo, J. and Markeset, T. (2012), Identifying Challenges in the Development of Subsea Petroleum Production Systems, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at  APMS2011, September 26th-28th, 2011, Stavanger, Norway
  26. Moreno-Trejo, J. and Markeset, T. (2012), Mapping Factors Influencing the Selection of Subsea Petroleum Production Systems, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at  APMS2011, September 26th-28th, 2011, Stavanger, Norway
  27. Moreno-Trejo, J. and Markeset, T. (2012), Identifying Challenges in the Maintenance of Subsea Petroleum Production Systems, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at  APMS2011, September 26th-28th, 2011, Stavanger, Norway
  28. Kayrbekova, D. and Markeset, T. (2011), Non-Conventional Cost Methods in Engineering Decision-Making in Equipment Selection Process, In: The Proceedings of the Mine Planning and Equipment Selection Conference (MPES2011), October 12-14th, Almaty, Kazakhstan
  29. Ratnayake, R.M.C., Samarakoon, S.M.S.M.K. and Markeset, T. (2011), Maintenance Integrity: Managing Flange Inspections on Aging Offshore Production Facilities, In: Proceedings of the ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2011), June 19-24th, Rotterdam, The Netherlands
  30. Barabadi, A., Barabady, J. and Markeset, T. (2011), Uncertainty Analysis of System Reliability Assessment under Arctic Conditions, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
  31. Barabadi, A., Hatami, M., Aliyari, M., Barabady, J. and Markeset, T. (2011), Reliability Analysis of an Electrical Power Distribution System Considering the Operational Environment: A Case Study, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
  32. Gusfre, D. and Markeset, T. (2011), Integrating Condition Based Maintenance in Existing Preventive Maintenance Programs in the Norwegian Oil and Gas Industry, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
  33. Homlong, E., Panesar, S.S., Kumar, R. and Markeset, T. (2011), Influence of Arctic Environment on Reliability, Availability, Maintainability and Supportability, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
  34. Kumar, R., Markeset, T., Barabady, J. and Kumar, U. (2011), Ergonomic Issues at a Railway Maintenance Workshop, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
  35. Ratnayake, R.M.C. and Markeset, T. (2011), Review of Current Trends in Asset Integrity Management, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
  36. Shao, H., Panesar, S.S., Kumar, R. and Markeset, T. (2011), A Risk-based Method to Quantify the Contribution of Maintenance Activities in the Offshore Petroleum Industry, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
  37. Sørensen, M., Barabady, J. and Markeset, T. (2011), Identification of Preventive Maintenance Intervals without the Use of Specialists: A Case Study, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway 
  38. Inegbedion, E.E., Trejo, J.M. and Markeset, T. (2011), Industrial Services in the Nigerian National Petroleum Corporation (NNPC), In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
  39. Kale, P.B., Bang, K.E., Markeset, T. (2011), Impact of Globalization on the Norwegian Oil Service Industry Segments, In: The Proceedings of the 24th International Congress on Condition Monitoring and Diagnostics Management (COMADEM2011), May 30th -June 1st, Stavanger, Norway 
  40. Markeset, T. (2011), Developments of Industrial Services: A Review of Current Research in Norway, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
  41. Barabadi, A., Barabady, J. and Markeset, T. (2010), Application of Accelerated Failure Model for Oil and Gas Industry in Arctic Region, In: The Proceedings of IEEE International Conference on Industrial Engineering and Engineering Management (IEEM2010), December 7-10th, Macau, China
  42. Markeset, T. (2010), Design for Performance: Review of Current Research in Norway, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2010), June 28-July 2nd, Nara, Japan
  43. Kayrbekova, D. and Markeset, T. (2010), Economic Decision Support for Offshore Oil and Gas Production in Arctic Conditions: Identifying the Need, In: The Proceedings of the European Safety and Reliability Conference (ESREL2010), September 5-9th, Rhodes, Greece
  44. Ratnayake, R.M.C. and Markeset, T. (2010), Maintaining Technical Integrity of Petroleum Flowlines on Offshore Installations: A Decision Support System for Inspection Planning, In: Proceedings of the ASME 2010 29th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2010), June 6-11th, Shanghai, China, Paper OMAE2010-20035
  45. Kumar, R., Barabady, J., Markeset, T. and Kumar, U. (2009), Ergonomic and Maintainability Design Issues in Mining, In: The Proceedings of the Mine Planning and Equipment Selection Conference (MPES2009), November 16-19th, 2009, Banff, Alberta, Canada
  46. Barabadi, A., Barabady, J. and Markeset, T. (2009), Management of Production Assurance in Harsh, Remote, and Sensitive Environment, In: The Proceedings of the 20th International Conference on Port and Ocean Engineering under Arctic Conditions (POAC2009), June 9-12th, Luleå, Sweden
  47. Gao, X., Barabady, J. and Markeset, T. (2009), A New Approach for Prediction of Maintainability Considering Arctic Environmental Conditions, In: The Proceedings of the 20th International Conference on Port and Ocean Engineering under Arctic Conditions (POAC2009), June 9-12th, Luleå, Sweden
  48. Kayrbekova, D. and Markeset, T. (2009), Life-Cycle Costing Analysis in Selection of Technical Alternative Solutions for Facilities to be Used in Arctic Locations, In: The Proceedings of the 20th International Conference on Port and Ocean Engineering under Arctic Conditions (POAC2009), June 9-12th, Luleå, Sweden
  49. Kumar, R., Barabady, J. and Markeset, T. (2009), Improvement of Performance of Oil and Gas Production Facility in Arctic by applying Human Factors/ Ergonomic Principles in the Design Phase, In: The Proceedings of the 20th International Conference on Port and Ocean Engineering under Arctic Conditions (POAC2009), June 9-12th, Luleå, Sweden
  50. Singh, M. and Markeset, T. (2009), Structural Analysis of Pipelines Containing Corrosion Defects, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2009), June 9-11th, San Sebastian, Spain
  51. Markeset, T. (2008), Design for Petroleum Production Performance in Arctic Locations Considering Maintenance and Support Services, In: The Proceedings of the Mine Planning and Equipment Selection Conference (MPES2008), October 20-22nd, Beijing, China
  52. Barabady, J., Markeset, T. and Kumar, U. (2008), Overall Production Assurance Effectiveness, In: The Proceedings of the 3rd World Congress on Engineering Asset Management and Intelligent Maintenance Systems (WCEAM-IMS 2008), ISBN 978-1-84882-216-0, Beijing International Convention Center, Oct, 28-30th, Beijing, China, pp 202-206
  53. Panesar, S.S., Kumar, R. and Markeset, T. (2008), Development of Maintenance Strategies for Offshore Production Facilities, In: The Proceedings of the 3rd World Congress on Engineering Asset Management and Intelligent Maintenance Systems (WCEAM-IMS 2008), ISBN 978-1-84882-216-0, Beijing International Convention Center, Oct, 28-30th, Beijing, China, pp 1227-1232
  54. Kayrbekova, D. and Markeset, T. (2008), LCC Analysis in Design of Oil and Gas Production Facilities to be Used in Harsh, Remote and Sensitive Environments, In: The Proceedings of the European Safety and Reliability Conference (ESREL2008), ISBN 978-0-415-48513-5, September 22-25th, Valencia, Spain
  55. Singh, M. and Markeset, T. (2008), Fuzzy Reliability Analysis of Corroded Oil and Gas Pipes, In: The Proceedings of the European Safety and Reliability Conference (ESREL2008), ISBN 978-0-415-48513-5, September 22-25th, Valencia, Spain
  56. Singh, M., Markeset, T. and Kumar, U. (2008), Failure Analysis of Corroded Oil and Gas Pipes Using Fuzzy Logic, In: The Proceedings of the 21st International Congress & Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM2008), June 11-13th, Prague, Czech Republic
  57. Markeset, T., Kumar, R. and Kumar, U. (2007), Remote Operations and Maintenance Support Services: A Conceptual Framework, In: The Proceedings of the Mine Planning and Equipment Selection Conference (MPES2007), December 11-13th, Bangkok, Thailand 
  58. Barabady, J., Markeset, T. and Kumar, U. (2007), Improvement of Production Plant Performance using Production Assurance Programmes, In: The Proceedings of the Swedish Production Symposium (SPS07), August 28-30th, Göteborg, Sweden
  59. Singh, M. and Markeset, T. (2007), Philosophical Aspects of Modeling Corrosion of Oil and Gas Pipelines, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2007), ISBN 978-91-631-8806-0, June 13-15th, Faro, Portugal
  60. Singh, M. and Markeset, T. (2007), Risk Analysis of Oil and Gas Pipelines Subjected to CO2 Corrosion, In: The Proceedings of the European Safety and Reliability Conference (ESREL2007), ISBN 978-0-415-44786-7, June 25-27th, Stavanger, Norway
  61. Panesar, S.S., Kumar, R. and Markeset, T. (2007), Innovation and Contracts in Business-to-Business Services, In: The Proceedings of The 2nd International Conference on Operations and Supply Chain Management (OSCM2007), ISBN: 978-974-677-637-0, May 18-20th, Bangkok, Thailand
  62. Markeset, T., Kumar, R. and Michel, J.E. (2007), Service Delivery Performance Measurement System: A Conceptual Framework, In: The Proceedings of The 2nd International Conference on Operations and Supply Chain Management (OSCM2007), ISBN: 978-974-677-637-0, May 18-20th, Bangkok, Thailand
  63. Gao, X., Markeset, T. and Kumar, U. (2007), A Review of Production Assurance in the Norwegian Petroleum Industry, In: The Proceedings of the Seventh International Conference on Reliability, Maintainability and Safety (ICRMS2007), ISBN 978-7-80144-682-4, August 20-26th, Beijing, China
  64. Gao, X. and Markeset, T. (2007), Design for Production Assurance Considering Influence Factors, In: The Proceedings of the European Safety and Reliability Conference (ESREL2007), ISBN 978-0-415-44786-7, June 25-27th, Stavanger, Norway
  65. Larsen, A. and Markeset, T. (2007), Mapping of Operations, Maintenance and Support Design Factors in Arctic Environments, In: The Proceedings of the European Safety and Reliability Conference (ESREL2007), ISBN 978-0-415-44786-7, June 25-27th, Stavanger, Norway
  66. Panesar, S.S. and Markeset, T. (2006), Maintenance Optimization Process in the Norwegian Petroleum Industry ? Key Issues, Challenges, and Opportunities, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2006), ISBN 978-91-631-8806-0, June 11-15th, Luleå, Sweden
  67. Panesar, S.S. and Markeset, T. (2006), Trends in Product Support and Service Strategies, In: The Proceeding of EUROMAINTENANCE2006 conference, ISBN 3-9523151-0-9 (old), ISBN 978-3-9523151-01, June 20-22nd, Basel, Switzerland
  68. Kumar, R. and Markeset, T. (2005), RCM as a Tool to Improve Production Performance ? Examples from Norwegian Industry, In: The Proceedings of Geominetech Symposium on ?New Equipment-New Technology management and Safety? in Mining and Mineral based Industries, May 11-12th, Bhubaneswar, India
  69. Markeset, T. and Kumar, U. (2005), The use of Life Cycle Costs and Profit Assessment to Improve Operations and Supply Chain Management Performance of Complex Oil Production Facilities, In: The Proceedings of The First International Conference on Operations and Supply Chain Management (OSCM2005), ISBN 979-545-039-5, December 15-17th, Bali, Indonesia
  70. Kumar, R., Panesar, S.S. and Markeset, T. (2005), Strategy Development for Industrial Services and Product Support, In: The Proceedings of The First International Conference on Operations and Supply Chain Management (OSCM2005), ISBN 979-545-039-5, December 15-17th, Bali, Indonesia
  71. Panesar, S.S. and Markeset, T. (2005), The role of Industrial Support Service in Operation and Maintenance in the Norwegian Oil and Gas Industry, In: The Proceedings of The First International Conference on Operations and Supply Chain Management (OSCM2005), ISBN 979-545-039-5, December 15-17th, Bali, Indonesia
  72. Markeset, T. and Kumar, R. (2004), Experiences from Implementation of Smart OMS to Enhance Operation and Maintenance Performance in the Norwegian Industry, In: The Proceeding of the International Conference on Intelligent Maintenance Systems (IMS2004), July 15-17th, Arles, France
  73. Markeset, T. and Kumar, U. (2004), Dimensioning of Product Support - Issues, Challenges, and Opportunities, In: The Proceedings of The Annual Reliability and Maintainability Symposium (RAMS2004), ISBN 0-7803-8215-3, ISSN 0149-144X, January 26-29th, Los Angeles, California, USA (Highlights from PhD thesis)
  74. Markeset, T. and Kumar, U. (2003), Integration of RAMS Information in Design Processes ? a Case Study, In: The Proceedings of The Annual Reliability and Maintainability Symposium (RAMS2003), ISBN 0-7803-7717-6, ISSN 0149-144X, January 27-31st, Tampa, Florida, USA: 220-225
  75. Markeset, T., Kumar, R. and Kumar, U. (2003), Trends in Product Support and Service Delivery Strategy for Mining Industry, In: The Proceedings of the Geominetech Symposium on New Equipment ? New Technology, Management and Safety in Mining and Mineral Based Industries, May 11-12th, Bhubaneswar, India.
  76. Markeset, T. and Kumar, U. (2002), Design and Development of Product Support & Maintenance Concepts for Industrial Systems, In: The Proceedings of the International Foundation for Research in Maintenance: Maintenance Management & Modelling, IFRIMMmmm2002, May 6-8th, Växjö, Sweden.
  77. Markeset, T. and Kumar, U. (2002), Integration of RAMS and Risk Analysis in Product Design & Development Work Processes ? A case study, In: The Proceedings of The International Foundation for Research in Maintenance: Maintenance Management & Modelling, IFRIMMmmm2002, May 6-8th, Växjö, Sweden.
  78. Markeset, T. and Kumar, U. (2001), Design and Development of Service and Maintenance Concepts for the Mining Industry, In: The Proceedings of the 10th International Symposium on Mine Planning & Equipment Selection (MPES2001), November 19-21st, New Delhi, India
  79. Markeset, T. and Kumar, U. (2001), R&M and Risk-Analysis Tools in Product Design, to Reduce Life-Cycle Cost and Improve Attractiveness, In: The Proceedings of the Annual Reliability and Maintainability Symposium (RAMS2001), ISBN 0-7803-6615-8, ISSN 0149-144X, Jan 22-25th, Philadelphia, USA: 116-122
  80. Liyanage, J.P., Markeset, T. and Kumar, U. (2001), On the Knowledge Driven Maintenance Performance Management Grounded in Process Intelligence: With Applications to Asset Maintenance and Product Development, In: The Proceedings of the 2nd European Conference on Intelligent Management Systems in Operations (IMSIO-2001), Operational Research Society, July 3-4th, Salford, UK
  81. Liyanage, J.P., Markeset, T., Kørte, J. and Kumar, U. (2001), Value & Risk: A balanced Performance Assessment Criterion for Maintenance in Offshore Engineering Constructions, In: The Proceedings of the 11th International Offshore & Polar Engineering Conference (ISOPE-2001), International Society of Offshore and Polar Engineers (ISOPE2001), June 18-22nd, Stavanger, Norway 
  82. Markeset, T. and Kumar, U. (2000), Application of LCC Techniques in Selection of Mining Equipment and Technology, In: The Proceedings of the 9th International Symposium on Mine Planning and Equipment Selection (MPES2000), Nov 6-9th, Athens, Greece
  83. Firoozabadi, A., Markeset, T. and Wong, T.W. (1996), Gravity Drainage in Layered-Media: Experiments and Analysis, SPE 35720, In: The Proceedings of the Society of Petroleum Engineers (SPE) Western Regional Meeting, May 22nd
  84. Firoozabadi, A. and Markeset, T. (1994), Miscible Displacement in Fractured Porous Media: Part I - Experiments, SPE/DOE 27743, In The proceedings of The 9th SPE/DOE Symposium on Improved Oil Recovery, April 17-20th, Tulsa, Oklahoma, USA
  85. Firoozabadi, A. and Markeset, T. (1992), An Experimental Study of Capillary and Gravity Crossflow in Fractured Porous Media, SPE24918, In: The Proceedings of the 67th Annual Conference and Exhibition of the Society of Petroleum Engineers (SPE), October 4-7th, Washington DC, USA
  86. Firoozabadi, A. and Markeset, T. (1992), An Experimental Study of the Gas-Liquid Transmissibility in Fractured Porous Media, SPE24919, In: The Proceedings of the 67th Annual Conference and Exhibition of the Society of Petroleum Engineers (SPE), October 4-7th, Washington DC, USA
Theses
  1. Markeset, T., (2003), Dimensioning of Product Support: Issues, Challenges, and Opportunities, Doctoral Thesis No. 6, University of Stavanger, ISBN 82-7644-197-1, ISSN 1502-3877
  2. Markeset, T. (1991), A Comparison between Hammer Impact Excitation Technique and Pseudo Random Noise Excitation Technique for Performing Experimental Modal Analysis, Master Thesis, University of Minnesota, Part 1: Thesis, Part 2: Figures
Reports
  1. Panesar, S.S. and Markeset, T. (2005), Industrial Services and Innovation Strategies in the Knowledge Intensive Economy: Mapping of Players, Roles, Content, Practices, and Needs, University of Stavanger Report Number 3, The Research Council of Norway Project Number 168175, ISBN 82-7644-285-4, ISSN 0806-7031 
  2. Markeset, T. (2002), Project Report ? Phase 2: Study of the Design and Manufacturing Process in Company X, PhD - Case study, University of Stavanger, Stavanger, Norway 
  3. Markeset, T. (2001), Project Report ? Phase 1: Study of the Design and Manufacturing Process in Company X, PhD - Case study, University of Stavanger, Stavanger, Norway 
  4. Firoozabadi, A. and Markeset, T. (1991), Project Results and Work in Progress, Report for Reservoir Engineering Research Institute (RERI) (Palo Alto, California, USA) Research Consortium Members and US Department of Energy 
  5. Firoozabadi, A. and Markeset, T. (1992), Project Results and Work in Progress, Report for Reservoir Engineering Research Institute (RERI) (Palo Alto, California, USA) Research Consortium Members and US Department of Energy 
  6. Firoozabadi, A. and Markeset, T. (1993), Project Results and Work in Progress, Report for Reservoir Engineering Research Institute (RERI) (Palo Alto, California, USA) Research Consortium Members and US Department of Energy 
COMPENDIUMS
  1. Markeset T. and Bang, K.E. (2017) Technology based services,10 ECTS, University of Stavanger, Stavanger, Norway 
  2. Markeset, T. (2015), Maintenance Engineering and Management, 10 ECTS, University of Stavanger, Stavanger, Norway 
  3. Markeset, T. (2010), Operations and Maintenance Management, 5 ECTS, University of Stavanger, Stavanger, Norway 
  4. Markeset, T. (2010), Condition Monitoring and Management, 5 ECTS, University of Stavanger, Stavanger, Norway 
  5. Markeset, T. (2008), PG430 ? Operations of process facilities, 10 ECTS, Tromsø University College, Tromsø, Norway 
  6. Markeset, T. and Liyanage, J.P. (2007), Operations and Maintenance, 10 ECTS, University of Stavanger, Stavanger, Norway 
  7. Markeset, T. (2006), Industrial Services, 5 ECTS Course, taught at Luleå University of Technology, Sweden 
  8. Markeset, T. (2006), Industrial Services, 5 ECTS, University of Stavanger, Stavanger, Norway, (further development of compendium Product Support and Integrated Logistics), 5 ECTS 
  9. Markeset, T. (2005), Product Support and Integrated Logistics, 5 ECTS, University of Stavanger, Stavanger, Norway 
  10. Kumar, U. Markeset, T. (2003), Introduction to Condition Monitoring, 5 ECTS, University of Stavanger, Stavanger, Norway 
  11. Liyanage, J.P. Markeset, T. (2003), Introduction to Operations, Safety, and Maintenance Management, 10 ECTS, University of Stavanger, Stavanger, Norway 

Forskningsområder

Industrial services: Product support, Service strategy development, Sourcing strategies, Subsea services, Operation and maintenance services, Service innovation management
Operations and maintenance: Operations and maintenance, engineering and management, Design for performance (functional capacity, capability, reliability, availability, maintainability, supportability, HSE, deliverability), Risk based maintenance (RBM), Risk based inspections (RBI), Operation and maintenance in Arctic environments

Utvalgte publikasjoner

  • Kusumawardhani, M., Kumar, R and Markeset, T (2016), Asset integrity management: offshore installations challenges, Journal of Quality in Maintenance Engineering, Volume 22 Issue 3, pp. 238 - 251, doi: 10.1108/JQME-06-2015-0023, (Highly commended paper for the Outstanding Paper award, in the 2017 Emerald Literati Network Awards for Excellence),  http://www.emeraldgrouppublishing.com/authors/literati/awards.htm?year=2017&journal=jqme  
  • Uyiomendo, E.E. and Markeset, T. (2015), Subsea maintenance service delivery: a multi-variable analysis model for predicting potential delays in scheduled services, Journal of Quality in Maintenance Engineering, Vol 21, Issue 1, pp. 34-54 (winner of the Outstanding Paper award in the 2016 Emerald Literati Network Awards for Excellence),http://www.emeraldgrouppublishing.com/authors/literati/awards.htm?year=2016&journal=jqme 
  • Markeset, T, Sæland, A.C., Gudmestad, O.T. and Barabady, J. (2015), [Book Chapter] Petroleum production facilities in Arctic operational environments, In: Bourmistrov, A., Mellemvik, F., Bambulyak, A., Gudmestad, O. T., Overland, I., Zolotukhin, A. (Eds.), International Cooperation and Arctic Petroleum: Barents Sea Scenarios
  • Singh, M. and Markeset, T. (2014), Handling of variability in probabilistic and possibilistic failure analysis of corroded pipes, DOI 10.1007/s13198-013-0197-y, International Journal of System Assurance Engineering and Management, ISSN 0975-6809, Vol 5, Issue 4, pp. 503-512
  • Singh, M. and Markeset, T. (2014), Hybrid models for handling of variability and uncertainty in probabilistic and possibilistic failure analysis of corroded pipes, Engineering Failure Analysis, Engineering Failure Analysis, Available online April 13, http://dx.doi.org/10.1016/j.engfailanal.2014.04.008
  • Barabadi, A., Barabady, J. and Markeset, T. (2014), Application of reliability models with covariates in spare part prediction and optimization - A case study, Reliability Engineering & System Safety, Volume 123, March 2014, Pages 1-7, http://dx.doi.org/10.1016/j.ress.2013.09.012 
  • Markeset, T., Moreno-Trejo, J., Kumar, R. (2013), Maintenance of Subsea Petroleum Production Systems: A Case Study, Journal of Quality in Maintenance Engineering, DOI 10.1108/13552511311315940, Vol. 19 No. 2, pp. 128-143
  • Moreno-Trejo, J., Kumar, R., Markeset, T. (2012), Factors Influencing the Installation and Maintenance of Subsea Petroleum Production Equipment: A Case Study, Journal of Quality in Maintenance Engineering, Vol 18, Issue 4, pp. 454 - 471
  • Kumar, R., Barabady, J., Markeset, T. and Kumar, U. (2012), Improving Maintainability in Extreme Cold Climatic Conditions, International Journal of Performability Engineering, Vol. 8, No. 5, September, pp. 563-572
  • Samarkoon, S.M.K., Markeset, T. and Gudmestad, O.T. (2012), Life Cycle Costing as a Tool for Selecting the Best Available and Qualified Technique for Managing Physical Assets, International Journal of Performability Engineering, Vol. 8, No.3, May 2012, pp.  249-264.
  • Barabadi, A., Barabady, J. and Markeset, T. (2011), Maintainability Analysis Considering Time-Dependent and Time-Independent Covariates, Reliability Engineering & System Safety, Vol. 96, Issue 1, January, pp. 210-217
  • Kayrbekova, D., Barabady, A. and Markeset, T. (2011), Maintenance Cost Evaluation and Uncertainty Analysis using Monte Carlo Simulation for a System to be Used in the Arctic Region, Journal of Quality in Maintenance Engineering, Vol. 17, No. 4, pp. 320-336
  • Ratnayake, R.M.C. and Markeset, T. (2010). Technical Integrity Management: Measuring HSE Awareness Using AHP in Selecting a Maintenance Strategy, Journal of Quality in Maintenance Engineering, Vol. 16, No. 1.
  • Gao, X., Barabady, J. and Tore Markeset, T. (2010). An Approach for Prediction of Petroleum Production Facility Performance Considering Arctic Influence Factors, Reliability Engineering & System Safety, Volume 95, Issue 8, pp. 837-846.
  • Singh, M. and Markeset, T. (2009). A Methodology for Risk-based Inspection Planning of Oil and Gas Pipes Based on Fuzzy Logic Framework, Engineering Failure Analysis, Vol. 16, pp. 2098-2113.
  • Panesar, S.S. and Markeset, T. (2008). Development of a Framework for Industrial Service Innovation Management and Coordination, Journal of Quality in Maintenance Engineering, Vol. 14, No. 2, pp. 177-193
  • Kumar, R. and Markeset, T. (2007). Development of Performance-Based Service Strategies for the O&G Industry: A Case Study, Journal of Business and Industrial Marketing, Vol. 22, Issue 4
  • Markeset, T. and Kumar, U. (2005). Study of Product Support Strategy: Conventional versus Functional Products, Journal of Quality in Maintenance Engineering, Vol. 11, No. 1
  • Markeset, T. and Kumar, U. (2003). Design and Development of Product Support & Maintenance Concepts for Industrial Systems, Journal of Quality in Maintenance Engineering, Vol. 9, No. 4.

Pågående forskning

  • Optimizing periodic preventive maintenance strategies through condition monitoring.
  • Energy efficient cold climate operation and winterization solutions 
  • Use of Lean Six Sigma Concepts for Improving the Productivity of Mechanical Integrity Assurance Processes: Manufacturing Industry to Process Industry

Arbeidserfaring

  • Head, Dept. of Industrial economics, Risk management and Planning, Faculty of Science and Technology, University of Stavanger (UiS), 2014/10?present
  • Interim Head, Dept. of Petroleum engineering, Faculty of Science and Technology, University of Stavanger (UiS), 2016/8?present
  • Professor of Mechanical Engineering (Operations and Maintenance), Department of Mechanical and Structural Engineering and Material Science, University of Stavanger (UiS), 2009/9?present. Associate Professor in same area and department from 2003/5 to 2009/8
  • Adjunct Professor (20% position), Department of Engineering and Safety, 2010/1?present, Adjunct Assoc. Prof. 2009/1?2009/12 (UiT), 2007/12?2008/12 (Tromsø University college  - now merged with University of Tromsø), University of Tromsø (UiT)
  • Guest Professor, University of Houston (UH), Houston, Texas, Sabbatical leave, 2013/10-2014/09
  • Member of the Board and Project manager, 2005/4-2013/9, Executive leader and project advisor: 2003/12 ? 2005/04, CIAM (Center for Industrial Asset Management), University of Stavanger
  • Doctoral Student in Offshore Engineering, Operations and Maintenance, 1999/8?2003/6, Stavanger University College (now University of Stavanger)
  • Senior process/ mechanical engineer, Stavanger and Bergen, Norway, 1997/3?2003/5, Kværner Oil and Gas (now AkerSolutions)
  • Computer specialist in the Norwegian Logistics Battalion, Modrica and Tuzla, Bosnia Herzegovina, 1996/1?1997/2, NATO: Peace Implementation Force (IFOR)/ Peace Stabilization Force (SFOR)
  • Senior R&D Engineer, Ulsteinvik, Norway, 1994/6?1997/2, Ulstein Propeller (now Rolls Royce):
  • Reservoir Research Engineer, Palo Alto, California, USA, 1991/1?1994/2 + summer 1990, Reservoir Engineering Research Institute (RERI)
  • Reservoir Research Engineer, Bergen, Norway, 1985/8?1987/9 + Summers of 1985, 88, 89, Norsk Hydro Research Center (now Statoil)

Vitenskapelige publikasjoner (fra CRISTin)

  • Markeset, Tore; Larsen, Anette Cecilie (2007). Proceedings of European safety and reliability conference (ESREL2007). Taylor & Francis Group. ISBN 9780415447867. 8 s.
  • Panesar, Sukhvir Singh; Markeset, Tore (2005). Industrial services and innovation strategies in the knowledge intensive economy - Mapping of players, roles, content, practices, and needs. University of Stavanger. ISBN 8276442854. 137 s.
  • Markeset, Tore (2003). Dimensioning of Product Support - Issues, Challenges, and Opportunities. Høgskolen i Stavanger, Avdeling for teknisk-naturvitenskapelige fag. ISBN 8276441971. 1 s.
  • Lokko, Nii Nortey Basil Clarence; Raza, Jawad; Markeset, Tore; Panesar, Sukhvir Singh (2014). Exploring the condition-based maintenance opportunities for production-critical assets. Universitet i Coimbra; 2014-09-04 - 2014-09-05.
  • Lokko, Nii Nortey Basil Clarence; Raza, Jawad; Markeset, Tore; Panesar, Sukhvir Singh (2014). Practical challenges in determining periodic maintenance intervals on the Norwegian Continental Shelf (NCS): Some expert views and opinions. University Coimbra; 2014-09-04 - 2014-09-05.
  • Moreno-Trejo, Jorge; Markeset, Tore (2014). Power Distribution in Subsea Developments: a System Engineering Perspective. 2014-10-14 - 2014-10-16.
  • Gudmestad, Ove Tobias; Markeset, Tore (2012). Norway's Oil Industry Working in Extreme Conditions. [Internett]; 2012-11-23.
  • Kumar, Rupesh; Markeset, Tore; Barabady, Javad; Kumar, Uday (2011). Ergonomic issues at a railway maintenance workshop. 2011-05-30 - 2011-06-01.
  • Sørensen, Michael; Barabady, Javad; Markeset, Tore (2011). Identification of preventive maintenance intervals without the use of specialists and dta: case study. 2011-05-30 - 2012-06-01.
  • Bang, Knut Erik; Markeset, Tore (2011). Globalization and Companies’ Competitive Situation: Impact on Model of Competition. 2011-09-26 - 2011-09-28.
  • Bang, Knut Erik; Markeset, Tore (2011). Globalization and Companies’ Competitive Situation: The Drivers and Effects of Economic Globalization. 2011-09-26 - 2011-09-28.
  • Gusfre, David; Markeset, Tore (2011). Integrating Condition Based Maintenance in Existing Preventive Maintenance Programs in the Norwegian Oil and Gas Industry. 2011-05-30 - 2011-06-01.
  • Homlong, Eirik; Kayrbekova, Dina; Panesar, Sukhvir Singh; Markeset, Tore (2011). Offshore Production Facilities in Arctic Environment: Assessment of Maintenance Time, Cost and Uncertainty. 2011-09-26 - 2011-09-28.
  • Homlong, Eirik; Panesar, Sukhvir Singh; Kumar, Rajesh; Markeset, Tore (2011). Influence of Arctic Environment on Reliability, Availability, Maintainability and Supportability. 2011-05-30 - 2011-06-01.
  • Inegbedion, Dennis Esefolo; Trejo, Jorge; Markeset, Tore (2011). Industrial Services in the Nigerian National Petroleum Corporation (NNPC. 2011-05-30 - 2011-06-01.
  • Kale, Prashan; Bang, Knut Erik; Markeset, Tore (2011). Impact of Globalization on the Norwegian Oil Service Industry Segments. 2011-05-30 - 2011-06-01.
  • Kayrbekova, Dina; Markeset, Tore (2011). Non-Conventional Cost Methods in Engineering Decision-Making in Equipment Selection Process. 2011-10-12 - 2011-10-14.
  • Kayrbekova, Dina; Panesar, Sukhvir Singh; Markeset, Tore (2011). Offshore Petroleum Modification Projects: Identification of Factors Causing Time and Cost Overruns. 2011-09-26 - 2011-09-28.
  • Markeset, Tore (2011). Development of Industrial Services: Review of Current Research in Norway. 2011-05-30 - 2011-06-01.
  • Palkar, S.; Østgulen, K.; Markeset, Tore (2011). Ageing Oil and Gas Offshore Production Facilities: Extending the Service Life Span. 2011-09-26 - 2011-09-28.
  • Ratnayake, R.M. Chandima; Markeset, Tore (2011). Review of Current Trends in Asset Integrity Management. 2011-05-30 - 2011-06-01.
  • Ratnayake, R.M. Chandima; Samarakoon, Samindi; Markeset, Tore (2011). Maintenance Integrity: Managing Flange Inspections On Aging Offshore Production Facilities (OMAE2011-49050). American Society of Mechanical Engineers (ASME); 2011-06-19 - 2011-06-24.
  • Ravnestad, G.; Kayrbekova, Dina; Panesar, Sukhvir Singh; Markeset, Tore (2011). Periodic Preventive Maintenance Strategies: Improving Strategies using Condition Monitoring Data. 2011-09-26 - 2011-09-28.
  • Shao, Hanchen; Panesar, Sukhvir Singh; Kumar, Rajesh; Markeset, Tore (2011). A Risk-based Method to Quantify the Contribution of Maintenance Activities in the Offshore Petroleum Industry. 2011-05-30 - 2011-06-01.
  • Trejo, Jorge; Markeset, Tore (2011). Subsea Petroleum Production Facilities: Identifying Development Challenges. 2011-09-26 - 2011-09-28.
  • Trejo, Jorge; Markeset, Tore (2011). Subsea Petroleum Production Facilities: Identifying Maintenance Challenges. 2011-09-26 - 2011-09-28.
  • Trejo, Jorge; Markeset, Tore (2011). Subsea Petroleum Production Facilities: Mapping Factors Influencing the System Selection Process. 2011-09-26 - 2011-09-28.
  • Ratnayake, R.M. Chandima; Markeset, Tore (2010). Maintaining Technical Integrity of Petroleum Flowlines on Offshore Installations: A Decision Support System for Inspection Planning. Ocean, Offshore and Arctic Engineering Division; 2010-06-06 - 2010-06-11.
  • Bar Abadi, Abbas; Barabady, Javad; Markeset, Tore (2009). Management of Production Assurance in Harsh, Remote, and Sensitive Environment. 2009-06-09 - 2009-06-12.
  • Barabady, Javad; Kumar, Rupesh; Markeset, Tore (2009). Improvement of Performance of Oil and Gas Production Facility in Arctic by applying Human Factors/Ergonomic Principles in the Design Phase. 2009-06-09 - 2009-06-12.
  • Gao, Xueli; Barabady, Javad; Markeset, Tore (2009). A New Approach for Prediction of Maintainability Considering Arctic Environmental Conditions. 2009-06-09 - 2009-06-12.
  • Larsen, Anette Cecilie; Markeset, Tore (2008). Mapping of operations, maintenance and support design factors in arctic environments. 2007-06-25 - 2007-06-27.
  • Barabady, Javad; Markeset, Tore; Kumar, Uday; Kumar, Uday (2007). Improvement of Production Plant Performance using Production Assurance Programmes. 2007-06-25 - 2007-06-27.
  • Gao, Xueli; Markeset, Tore (2007). Design for production assurance considering influence factors. 2007-06-25 - 2007-06-27.
  • Gao, Xueli; Markeset, Tore; Kumar, Uday (2007). A review of production assuance in the Norwegian oil and gas industry. 2007-08-22 - 2007-08-26.
  • Markeset, Tore; Kumar, Rajesh; Kumar, Uday (2007). Remote Operations and Maintenance Support Services: A Conceptual Framework. 2007-12-11 - 2007-12-13.
  • Markeset, Tore; Kumar, Rajesh; Michel, Jacques Etienne (2007). Service Delivery Performance Measurement System: A Conceptual Framework. 2007-05-18 - 2007-05-20.
  • Panesar, Sukhvir Singh; Kumar, Rajesh; Markeset, Tore (2007). Innovation and Contracts in Business-to-Business services. 2007-05-18 - 2007-05-20.
  • Singh, Maneesh; Markeset, Tore (2007). Risk analysis of oil and gas pipelines subjected to CO2 corrosion. 2007-06-25 - 2007-06-27.
  • Singh, Maneesh; Markeset, Tore; Kumar, Uday (2007). Philosophical aspects of modeling corrosion of oil and gas pipelines. 2007-06-13 - 2007-06-15.
  • Panesar, Sukhvir Singh; Markeset, Tore (2006). Maintenance Optimization Process in the Norwegian Petroleum Industry ? Key Issues, Challenges, and Opportunities. 2006-06-11 - 2006-06-15.
  • Panesar, Sukhvir Singh; Markeset, Tore (2006). Trends in Product Support and Service Strategies. 2006-06-20 - 2006-06-22.
  • Kumar, Rajesh; Panesar, Sukhvir Singh; Markeset, Tore (2005). Strategy Development for Industrial Services and Product Support. 2005-12-15 - 2005-12-17.
  • Markeset, Tore; Kumar, Uday (2005). The use of Life Cycle Costs and Profit Assessment to Improve Operations and Supply Chain Management Performance of Complex Oil Production Facilities. 2005-12-15 - 2005-12-17.
  • Panesar, Sukhvir Singh; Markeset, Tore (2005). The role of Industrial Support Service in Operation and Maintenance in the Norwegian Oil and Gas Industry. 2005-12-15 - 2005-12-17.
  • Liyanage, Jayantha; Markeset, Tore (2004). Drift og Vedlikehold -Videregående.
  • Markeset, Tore; Kumar, Rajesh (2004). Experiences from Implementation of Smart OMS to Enhance Operation and Maintenance Performance in the Norwegian Industry. 2004-07-15.
  • Markeset, Tore; Liyanage, Jayantha; Kumar, Uday (2004). Drifts- og Vedlikeholdsstyring.
  • Markeset, Tore; Liyanage, Jayantha; Kumar, Uday (2004). Tilstandsovervåkning.
  • Markeset, Tore; Kumar, Rajesh; Kumar, Uday (2003). Trends in Product Support and Service Delivery Strategy for Mining Industry. 2003-05-11 - 2003-05-12.
  • Markeset, Tore; Kumar, Uday (2003). Integration of RAMS Information in Design Processes &2811; a Case Study. 2003-01-23 - 2003-01-31.
  • Markeset, Tore; Kumar, Uday (2002). Design and development of product support and maintenance concepts for industrial systems. 2002-05-06 - 2002-05-08.
  • Markeset, Tore; Kumar, Uday (2002). Integration of RAMS and risk analysis in product design and development -- a case study. 2002-05-06 - 2002-05-08.
  • Liyanage, Jayantha; Markeset, Tore; Kumar, Uday (2001). On the knowledge driven performance management grounded in process intelligence: With applications to Asset maintenance and Product development. 2001-07-03 - 2001-07-04.
  • Liyanage, Jayantha; Markeset, Tore; Kørte, Jens; Kumar, Uday (2001). Value & Risk: A balanced Performance Assessment Criterion for Maintenance in Offshore Engineering Constructions. 2001-06-18 - 2001-06-22.
  • Markeset, Tore; Kumar, Uday (2001). Application of LCC techniques in selection of mining and equipment and technology.
  • Markeset, Tore; Kumar, Uday (2001). Design and Development of Service and Maintenance Concepts for the Mining Industry. 2001-11-19 - 2001-11-21.
  • Markeset, Tore; Kumar, Uday (2001). RM and Risk Analysis Tools in Product Design, to Reduce Life-Cycle-Cost and Improve Attractiveness. 2001-01-22 - 2001-01-25.
  • Markeset, Tore; Kumar, Uday (2000). Application of LCC Techniques in Selection of Mining Equipment and Technology. 2000-11-06 - 2000-11-09.
  • Firoozabadi, A.; Markeset, Tore; Wong, T.W. (1996). Gravity Drainage in Layered-Media: Experiments and Analysis. 1996-05-22.
  • Firoozabadi, A.; Markeset, Tore (1994). Miscible Displacement in Fractured Porous Media: Part I&2812;Experiments. 1994-04-17 - 1994-04-20.