Helge Hodne

Ghaedi, Parisa; Khalifeh, Mahmoud; Saasen, Arild; Hodne, Helge; Omland, Tor Henry; Shoghl, Farzad

(2019)

Mechanical Friction in Well Construction and Laboratory Testing of Friction Coefficients. I: ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2019): Volume 8: Polar and Arctic Sciences and Technology; Petroleum Technology .

The American Society of Mechanical Engineers (ASME)

ISBN 978-0-7918-5887-5.

DOI: 10.1115/OMAE2019-96594

Khalifeh, Mahmoud; Saasen, Arild; Hodne, Helge; Motra, Hem Bahadur

(2019)

Laboratory evaluation of rock-based geopolymers for zonal isolation and permanent P&A applications.

Journal of Petroleum Science and Engineering

ISSN 0920-4105.

Volum 175.

s.352-362.

DOI: 10.1016/j.petrol.2018.12.065

Saasen, Arild; Hodne, Helge; Ronæs, Egil; Aarskog, Simen André; Hetland, Bente; Løvereide, Marie Bjørdal; Mohammadi, Rahmat

(2018)

Wood Fibre Based Lost Circulation Materials. I: ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering - Volume 1: Offshore Technology - .

The American Society of Mechanical Engineers (ASME)

ISBN 978-0-7918-5120-3.

DOI: 10.1115/omae2018-77662

Khalifeh, Mahmoud; Motra, Hem B.; Saasen, Arild; Hodne, Helge

(2018)

Potential Utilization for a Rock-Based Geopolymer in Oil Well Cementing. I: ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering - Volume 8: Polar and Arctic Sciences and Technology; Petroleum Technology.

The American Society of Mechanical Engineers (ASME)

ISBN 978-0-7918-5129-6.

DOI: 10.1115/omae2018-78305

Khalifeh, Mahmoud; Saasen, Arild; Larsen, Helge Bøvik; Hodne, Helge

(2017)

Development and Characterization of Norite-Based Cementitious Binder from an Ilmenite Mine Waste Stream.

Advances in Materials Science and Engineering

ISSN 1687-8434.

Volum 2017.

DOI: 10.1155/2017/6849139

Strømø, Kjartan Moe; Saasen, Arild; Hodne, Helge; Pallin, Jan Egil; Aaker, Gudmund

(2017)

Ditch Magnet Performance. I: ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering - Volume 8: Polar and Arctic Sciences and Technology; Petroleum Technology, Trondheim, Norway, June 25–30, 2017 .

The American Society of Mechanical Engineers (ASME)

ISBN 978-0-7918-5776-2.

DOI: 10.1115/OMAE2017-61026

Khalifeh, Mahmoud; Saasen, Arild; Hodne, Helge; Godøy, Rune; Vrålstad, Torbjørn

(2017)

Geopolymers As an Alternative for Oil Well Cementing Applications: A Review of Advantages and Concerns. I: ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering - Volume 8: Polar and Arctic Sciences and Technology; Petroleum Technology, Trondheim, Norway, June 25–30, 2017 .

The American Society of Mechanical Engineers (ASME)

ISBN 978-0-7918-5776-2.

DOI: 10.1115/OMAE2017-61227

Saasen, Arild; Hodne, Helge

(2016)

Influence of Vibrations on the Rheological Properties of Drilling Fluids and its Consequence on Solids Control.

Applied Rheology

ISSN 1430-6395.

Volum 26.

Hefte 2.

DOI: 10.3933/APPLRHEOL-26-25349

Khalifeh, Mahmoud; Todorovic, Jelena; Vrålstad, Torbjørn; Saasen, Arild; Hodne, Helge

(2016)

Long-term durability of rock-based geopolymers aged at downhole conditions for oil well cementing operations.

Journal of Sustainable Cement-Based Materials

ISSN 2165-0373.

Volum 6.

Hefte 4.

s.217-230.

DOI: 10.1080/21650373.2016.1196466

Khalifeh, Mahmoud; Saasen, Arild; Vrålstad, Torbjørn; Larsen, Helge Bøvik; Hodne, Helge

(2016)

Experimental study on the synthesis and characterization of aplite rock-based geopolymers.

Journal of Sustainable Cement-Based Materials

ISSN 2165-0373.

Volum 5.

Hefte 4.

s.233-246.

DOI: 10.1080/21650373.2015.1044049

Saasen, Arild; Hodne, Helge

(2015)

The Influence of Drilling Fluid Rheological Properties on Primary Solids Control. I: Proceedings ASME 2015 34th International Conference on Ocean, Offshore and Arctic Engineering Volume 10: Petroleum Technology.

The American Society of Mechanical Engineers (ASME)

ISBN 978-0-7918-5658-1.

DOI: 10.1115/OMAE2015-41749

Khalifeh, Mahmoud; Saasen, Arild; Vrålstad, Torbjørn; Hodne, Helge

(2014)

Potential utilization of class C fly ash-based geopolymer in oil well cementing operations.

Cement & Concrete Composites

ISSN 0958-9465.

Volum 53.

s.10-17.

DOI: 10.1016/j.cemconcomp.2014.06.014

Taghiyev, Farid; Saasen, Arild; Hodne, Helge

(2014)

Application of Thermo-Mechanically Treated Drill Cuttings as an Alternative to Bentonite in Spud Muds.

Annual Transactions - The Nordic Rheology Society

ISSN 1601-4057.

Volum 22.

Khalifeh, Mahmoud; Saasen, Arild; Vrålstad, Torbjørn; Hodne, Helge

(2014)

Potential Utilization of Geopolymers in Plug and Abandonment Operations. I: SPE Bergen One Day Seminar, Bergen, Norway, 2 April 2014 - Conference Proceedings.

Society of Petroleum Engineers

ISBN 978-1-61399-323-1.

DOI: 10.2118/169231-m

Saasen, Arild; Hodne, Helge; Khalifeh, Mahmoud; Vrålstad, Torbjørn

(2013)

Techniques and Materials for North Sea Plug and Abandonment Operations. I: Offshore Technology Conference.

Society of Petroleum Engineers

ISBN 978-1-61399-241-8.

DOI: 10.4043/23915-m

Omland, Tor Henry; Hodne, Helge; Saasen, Arild; Mjølhus, Stian; Amundsen, Per Amund

(2013)

Drilling Fluid Weight Material Sedimentation—Sedimentation of Suspensions.

Petroleum science and technology

ISSN 1091-6466.

Volum 31.

Hefte 18.

s.1908-1915.

DOI: 10.1080/10916466.2010.489085

Costamte, Johanes Ronny; Trondsen, A.; Bergkvam, R.; Hodne, Helge; Saasen, Arild

(2012)

Horizontal Openhole Gravel Packing in Wells with Long Blank Pipe and Screen Sections. I: Deepwater Drilling and Completions Conference.

Society of Petroleum Engineers

ISBN 978-1-61399-208-1.

DOI: 10.2118/150546-m

Reinås, Lorents; Hodne, Helge; Turkel, Mirkamil A

(2011)

Hindered Strength Development in Oilwell Cement due to Low Curing Temperature (DOI10.2118/149687-MS). I: Arctic and Extreme Environments Conference and Exhibition, 18-20 October 2011, Moscow, Russia. - Society of Petroleum Engineers.

Society of Petroleum Engineers

ISBN 978-1-61399-174-9.

DOI: 10.2118/149687-m

Edy, I Ketut Ascar; Saasen, Arild; Hodne, Helge

(2011)

Rheological Properties of Fracturing Fluids.

Annual Transactions - The Nordic Rheology Society

ISSN 1601-4057.

Volum 19.

s.47-52.

Omland, Tor H.; Hodne, Helge; Saasen, Arild; Mjølhus, Stian; Amundsen, Per Amund

(2010)

Rig-site equipment determines drilling fluid weight material sag.

Oil & Gas Journal

ISSN 0030-1388.

Volum 108.

Hefte 1.

s.39-45.

Hodne, Helge; Saasen, Arild; Haugland, Jone

(2009)

Rheological Measurements of Cementitious Suspensions Using a Grooved Measuring Device. I: Papers presented at the Nordic Rheology Conference, Reykjavik, Iceland, August 18-20, 2009 : general papers and papers from the special sessions on emulsion and suspension rheology / editor: K. Nevalainen.

ISBN 9789521521362.

s.69-73.

Hodne, Helge; Galta, Stian; Saasen, Arild

(2007)

Rheological modelling of cementitious materials using the Quemada model.

Cement and Concrete Research

ISSN 0008-8846.

Volum 37.

Hodne, Helge; Falkeid, Vivian; Saasen, Arild

(2006)

The influence of entrapped air on rheological properties of cement suspensions in early state of hydration.

Annual Transactions - The Nordic Rheology Society

ISSN 1601-4057.

Volum 14.

s.103-106.

Hodne, Helge; Saasen, Arild; Pita, Edin

(2005)

Rheology of cementitious suspensions containing weighting agents. I: Annual Transactions of the Nordic Rheology Society.

s.191-197.

Hodne, Helge; Beattie, James K.

(2001)

Verification of the Electroacoustic Calibration Standard: Comparison of the Dynamic Mobility of Silicododecamolybdate and Silicododecatungstate Acids and Salts.

Langmuir

ISSN 0743-7463.

Volum 17.

Hefte 10.

s.3044-3046.

Hodne, Helge; Saasen, Arild; O`Hagan, Arthur B.; Wick, Svein O.

(2000)

Effects of time and shear energy on the rheological behaviour of oilwell cement slurries.

Cement and Concrete Research

ISSN 0008-8846.

Volum 30.

s.1759-1766.

Hodne, Helge; Saasen, Arild

(2000)

The effect of the cement zeta potential and slurry conductivity on the consistency of oilwell cement slurries.

Cement and Concrete Research

ISSN 0008-8846.

Volum 30.

s.1767-1772.

Legland Skoglund, Linn Jeanette

(2015)

Use of an ultrasonic processor to create oil based muds.

Universitetet i Stavanger

Hodne, Helge

(2007)

Rheological performance of cementitious materials used in well cementing.

ISBN 9788276443349.

Ghaedi, Parisa; Khalifeh, Mahmoud; Saasen, Arild; Hodne, Helge; Omland, Tor Henry; Shoghl, Farzad

(2019)

MECHANICAL FRICTION IN WELL CONSTRUCTION AND LABORATORY TESTING OF FRICTION COEFFICIENTS.

Khalifeh, Mahmoud; Saasen, Arild; Hodne, Helge; Dziekonski, Mitchell; Brown, Christian

(2018)

Bond Strength Between Different Casing Materials and Cement.

Khalifeh, Mahmoud; Saasen, Arild; Hodne, Helge; Godøy, Rune; Vrålstad, Torbjørn

(2017)

Geopolymers as an Alternative for Oil Well Cementing Applications: A Review of Advantages and Concerns.

Khalifeh, Mahmoud; Hodne, Helge; Saasen, Arild; eduok, Ekom

(2016)

Usability of Geopolymers for Oil Well Cementing Applications: Reaction Mechanisms, Pumpability, and Properties.

Khalifeh, Mahmoud; Saasen, Arild; Vrålstad, Torbjørn; Larsen, Helge Bøvik; Hodne, Helge

(2015)

Cap rock restoration in plug and abandonment operations; possible utilization of aplite-based geopolymers for permanent zonal isolation and well plugging.

Khalifeh, Mahmoud; Saasen, Arild; Hodne, Helge; Korsnes, Reidar Inge

(2015)

Cap Rock Restoration in Plug and Abandonment Operations; Possible Utilization of Rock-based Geopolymers for Permanent Zonal Isolation and Well Plugging.

Taghiyev, Farid; Saasen, Arild; Hodne, Helge

(2014)

Application of Termo-Mechanically Treated Drill Cuttings as an Alternative to Bentonite in Spud Muds.

Reinås, Lorents; Hodne, Helge; Turkel, Mirkamil A

(2011)

Hindered Strength Development in Oil Well Cement due to Low Curing Temperature.

Hodne, Helge; Saasen, Arild; Haugland, Jone

(2009)

Rheological Measurements of Cementitious Suspensions Using a Grooved Measuring Device.

Hodne, Helge; Falkeid, Vivian; Saasen, Arild

(2006)

The influence of entrapped air on rheological properties of cement suspensions in early state of hydration.

Hodne, Helge; Saasen, Arild; Pita, Edin

(2005)

Rheology of cementitious suspensions containing weighting agents.

Hodne, Helge; Saasen, Arild

(2004)

Rheological Modelling of Cementitious Materials.

Omland, Tor H.; Øvsthus, Jorunn; Svanes, Kåre; Saasen, Arild; Jacob, Hans-Joachim; Sveen, Terje; Hodne, Helge; Amundsen, Per Amund

(2004)

Weighting Material Sag.

Hodne, Helge; Saasen, Arild

(2003)

Rheological Properties of the Silica phases in Clinker slurries.

Hodne, Helge; Saasen, Arild; Håheim, Ståle; Ovesen, Eirik

(2002)

Rheological Properties of High Temperature Silica Oil Well Slurries.

Hodne, Helge; Saasen, Arild; Strand, Skule

(2001)

Rheological Properties of High Temperature Oil Well Cement Slurries.

Hodne, H.; OHagen, A.B.; Saasen, A.; Wick, S.O.

(2001)

Effects of Shear History on the Viscosity and Gel Development of Oil W ell Cement Slurries.

Hodne, Helge; Jakobsen, S.O.; A., R.; Saasen, A.

(1999)

Comparative Study of Testing Methodes for Cement Pastes.

Hodne, Helge; O`Hagan, Arthur B.; Saasen, Arild; Wick, Svein O.

(1998)

Effects of Shear History on the Viscosity and Gel Development of Oil Well Cement Slurries.

Hodne, Helge; Wick, Svein O.; Jakobsen, Rolf A.; Saasen, Arild

(1997)

Comparative Study of Testing Methods for Cement pastes.